PACE 1 1/4" Steerer needed

[Killer steVe]

Hi all.

Long shot but I'm after a steerer for my RC35's. I need a threaded 1 1/4" steerer of at least 210mm.

Thanks in advance.

 

[Dale cannon]

Hi all.

Long shot but I'm after a steerer for my RC35's. I need a threaded 1 1/4" steerer of at least 210mm.

Thanks in advance.

Hi, Steve. I'm pretty ignorant of Pace forks but I have an 1 1/4 threaded steerer sat on my shelf. I will never use it so if you can you are welcome to it. It's brand new, never fitted.

If you'd like a pic let me know and I will send you one over.

Ben.

 

[bhill22]

Threaded 1 1/4" steerer of at least 210mm

Have 1 1/4, although might struggle for that length as that's pretty long for a threaded? ahead yes, threaded would be excepitional

 

[Killer steVe]

Gents.

Thanks for replying.

Ben, yes please, if you could send a photo that would be great thanks.

bhill22, I must admit I am guessing a bit on length. The head tube is approx 140mm so I guessed that with the headset cups and nut etc and adding enough length for the fork crown, I would need about 200mm so went for 210mm to allow a bit of trimming.

 

[bhill22]

Will measure mine and put up a pic, not a popular size 1 1/4 !

I measured at 145mm above the crown

 

[Killer steVe]

Hi bhill22.

Thanks for the photo. At 145mm above the crown it might be just a bit too short with a 140mm headtube. I will see if I can measure the distance between the top of the headset tube and the top of the headset nut when it place to give a better idea if the actual length.

Just out of interest, how much would you want for it and could I get the crown race as well please if it's available?

Many thanks.