odds & ends

Drapoon

Kona Fan
A right mix of stuff here clogging up my tool chest - needs to go.
Apologies for poor photos - accidently shot with no flash :oops:

Ritchey canti's, Nos. £25 posted
main.php

main.php

main.php


Syncros polished stem, decals half missing, no top cap (the real crux) 100mm long 1/8th ahead - £8 posted
main.php

main.php


Ritchey stem 1”/8th threaded – lovely ti/ brushed steel colour. £25 posted
main.php

main.php



STX RC front hub, nos 32 hole - £15 posted
main.php

main.php


Suntour xc pro (Pedersen design) rear brakes – deemed too powerful for the front! Sadly no mounting bolts, very good condition, brake block have plenty life left - £10 posted
main.php

main.php

main.php


Unknown brand Ti bottle cage, stupidly light/ not the most practical over rough terrain as it is perhaps too light and the larger full bottles can bounce around a bit. Perfect finishing touch on a garage queen or footpath bike - £20 posted
main.php

main.php


XT shark fin fitted for circa 10 miles – Hence very good condition. Can provide zip ties. £8 posted
main.php

main.php


Hope disc rotor – old style with the toothed hubs 160-165mm dia plenty of meat left & appears very straight - £10 posted
main.php

main.php


Raceface bash ring – 104mm bcd. Fantastic condition on the outer edge but a few minor scuffs from chain rub on the inner - £15 posted
main.php

main.php


Rockshox Mag series shock pump – appears to work but no longer have any forks to fully test - £15 posted
main.php

main.php


Gt toe strap straps in white, look pretty cool these. Nos in bag - £8 posted
main.php

main.php


Pair of (a bikes worth) LX m565 in minty condition – circa 10 miles use. No fixing bolts but I may have some lying about I will pop in - £18 posted
main.php



Nos in box 7 speed mk2 silver crud claw £10 posted
main.php



Near Nos - Has been trial fitted on a steerer, Nukeproof red stem with yellow Nukeproof decals 1" 1/8th ahead 0deg 135m centre to centre £25 posted
main.php

main.php

main.php


Any offers welcome – multiple buys more than welcome!

Thanks

Martin
[/img]
 
I'll take the Syncros stem if it hasn't gone.

Looks to be 0 degree rise, please confirm
Can't quite tell if the clamp inside is a proper one or something diy, please confirm.

Cheers
 
ritchey levers sold

Awaiting a reply from somebody saying they would have the stem before you Development_cycle. Yours if they don't get back to me

Bolt through stem is all syncros & pretty sure it's 5deg fyi

ta!

Martin
 
Back
Top