mattyboy199
Retro Guru
10 week wait for the frame but finally took delivery in May of the frame. The build began. Brakes, seatpost, bars, stem & cranks were taken from my old build found here http://www.retrobike.co.uk/forum/viewto ... highlight=
Santa cruz chameleon medium frame
Rock shox sektor u turn forks (Marzoochi drop off's on original build)
Stans crest on superstar switch evo hubs ith green nipples (SS green skewers) with DMR moto/ Schwable rockets rons
Avid ultimate disc brake set (superstar pads & rotors with green ti bolts also Mowa green hose clips)
Azonic single wall riser bars
ODI lock on shortened grip with superstar lock rings / caps & ti bolt upgrade
Specialized cold forged stem
FSA XL II headset
USE seatpost with ti bolt upgrade (old style very light)
superstar seat clamp with ti bolt upgrade
Selle Italia SLR XC saddle
Wellgo MG-1 with ti axles (extremely light)
XT crank arms with blackspire chainrings
Token bottom bracket (although cheap they never last anyway & these are light)
XO twist shift with ally clamp bolts with Jagwire cable kit
XT front & rear mechs
PG990 cassette
PG970 CHAIN
Few more things to complete, fork adjusters will be anodised green along with the through axle, hub adaptors & brake adaptors. Also plan to upgrade the brake adaptor & caliper bolts ( 8 ) to titanium.
Thanks
Matt
Santa cruz chameleon medium frame
Rock shox sektor u turn forks (Marzoochi drop off's on original build)
Stans crest on superstar switch evo hubs ith green nipples (SS green skewers) with DMR moto/ Schwable rockets rons
Avid ultimate disc brake set (superstar pads & rotors with green ti bolts also Mowa green hose clips)
Azonic single wall riser bars
ODI lock on shortened grip with superstar lock rings / caps & ti bolt upgrade
Specialized cold forged stem
FSA XL II headset
USE seatpost with ti bolt upgrade (old style very light)
superstar seat clamp with ti bolt upgrade
Selle Italia SLR XC saddle
Wellgo MG-1 with ti axles (extremely light)
XT crank arms with blackspire chainrings
Token bottom bracket (although cheap they never last anyway & these are light)
XO twist shift with ally clamp bolts with Jagwire cable kit
XT front & rear mechs
PG990 cassette
PG970 CHAIN





Few more things to complete, fork adjusters will be anodised green along with the through axle, hub adaptors & brake adaptors. Also plan to upgrade the brake adaptor & caliper bolts ( 8 ) to titanium.
Thanks
Matt