MTB cranks & chainrings - more added

[Dead Rats]

All prices include postage to UK mainland addresses only. Also have some road stuf here:
http://www.retrobike.co.uk/forum/viewtopic.php?p=955628

pair alloy CPI 175mm 5 bolt square taper cranks with triple fitting
standard 94 bcd
bit battered (gouge on driveside arm) but ok for cheap hack as threads & tapers are fine
SOLD
£8 posted


compact triple chainring set
outer is 44 tooth x 94 bcd (black alloy)
middle is 32 tooth x 94 bcd (silver steel)
granny is 22 tooth x 58 bcd (silver steel)
chainring bolts not shown but will be supplied in VGC
inner has a bit of a battering around one of the holes but attaches fine
£13 posted
SOLD


pair alloy square taper Shimano cranks which work fine as a pair as they have the same taper orientation & 170mm length
LH = FC-TY90
RH = FC-MT60 / 5 bolt
will require 74bcd ring(s)
possible useful on a single speed hack with 28 tooth granny fitted and small rear cog?
SOLD
£8 posted


steel Shimano SG-X middle
7/8 speed
32 tooth
standard 104 bcd
still a few miles left!

£6 posted


alloy SG-X middle taken from a Deore XT M760 Hollowtech II crankset (as I fitted a set of steel rings to it)
9 speed, standard 104 bcd, 32 tooth, still a few miles left!
SOLD
£7 posted


set of 44/32/22 Specialized CXP rings from a 4-bolt Strongarm chainset
standard 104 bcd alloy outer & middle
unusual 58 bcd steel inner (will probably only fit Strongarm cranks) Middleburn do a similar size for Specialized cranksets only!
well used but some life left in inner and outer!

£10 posted

 

[Charlieboy28]

hi ya Alex, those top cranks are cpi if im not mistaken, i just sold a pair for the same price, then coomber pms me yesterday asking after them, so Adrian (coomber) was after a pair only yesterday evening

 

[Dead Rats]

hi ya Alex, those top cranks are cpi if im not mistaken, i just sold a pair for the same price, then coomber pms me yesterday asking after them, so Adrian (coomber) was after a pair only yesterday evening

well spotted Charlie, thanks mate

 

[Daddy Pig]

Hi Rats. For the 2nd time tonight, it looks like I'm just too late. Could I please have 2nd call on the CPI cranks if Coomber doesn't want them. Thanks v much..

 

[Dead Rats]

Hi Rats. For the 2nd time tonight, it looks like I'm just too late. Could I please have 2nd call on the CPI cranks if Coomber doesn't want them. Thanks v much..

of course, but do look closely at the photo as the RH arm is well gouged!

 

[Daddy Pig]

Thanks for your quick reply

I'm after cranks for a tip-rescue bike. Gonna be a s/s hack, so as long as the gouge is only cosmetic I'm happy... I don't want to jump in if someone else has 1st dibs though

 

[Dead Rats]

Thanks for your quick reply

I'm after cranks for a tip-rescue bike. Gonna be a s/s hack, so as long as the gouge is only cosmetic I'm happy... I don't want to jump in if someone else has 1st dibs though

Sure thing
it's not affecting their performance but it's not pretty and is about 1.5mm deep... I don't know how it happended by the way! If you still want them let me know, not heard back from Coomber yet but I don't think he's been online (or not on here anyway) so you would still have 2nd dibs

 

[coomber]

Those cranks are what I'm after but as i'm on a slow long build I'll let Daddy Pig have them. Thanks a lot for the offer and PM though.

If he changes his mind I'll have them but as his need seems higher and they will no doubt just be in my shed for 3-4 months his need seems more [/b]

 

[Dead Rats]

Thanks for your quick reply

I'm after cranks for a tip-rescue bike. Gonna be a s/s hack, so as long as the gouge is only cosmetic I'm happy... I don't want to jump in if someone else has 1st dibs though

you have PM Daddy, thanks Coomber

 

[hurin76]

sorry to jump in on the thread, but I think I have a set of those cranks out in my shed somewhere if someone wants to buy them.. pm me for details