OK I have a hoard of Marzocchi steerers to sell.
They all fit the 30mm crown forks (such as Z2/Z3 etc etc) but may fit others with a 30mm crown diameter. They will fit bolt-in and press-in crowns. Please double check your crown bore is 30mm before buying!
They all have the taper for the crown race and a seating lip to prevent pulling the tube up through the crown.
Post will be £5 on any steerer. Still £5 if you buy more than one as can post together. Also please check my other for sale items to combine postage to save money and to help save the world.
Anyway,
Steerers:
1. Lightweight Alloy, shot peened, NOS, 1 1/8" x 287mm total length = approx 260mm above crown (listed as a 28.6 x 260), BRAND NEW, £29
2. Cro-Mo steel, NOS, 1 1/8" x 267mm total length = approx 240mm above crown (listed as a 28.6 x 240) BRAND NEW, £20 each (I have 2 of these)
3. Cro-Mo steel, NOS, 1 1/8" x 327mm total length = approx 300mm above crown (listed as a 28.6 x 300) BRAND NEW, £24 each (I have 2 of these)
4. Cro-Mo steel, nearly new/hardly used - very close to new, not even a dab of surface rust anywhere! 1 1/8", cut to approx 245mm total length = approx 220mm above crown. Includes star nut fitted so ready to go! £18
5. Cro-Mo steel, NOS, 1" x 327mm total length = approx 300mm above crown (listed as a 25.4 x 300) BRAND NEW, hard to find now, perfect for any tall Bontrager or Fat Chance riders! The diameter at the crown is 27.2 so by luck/genius you could use this steerer in virtually any fork - in a 28.6 Pace crown for example, you would just need a 27.2 > 28.6 seatpost shim. 27.2 ID seatpost shims are readily available in loads of sizes so a super easy solution! £29
6. Shim to fit the Marzocchi 30mm crown for the above 1" steerer £5
Pic:
Not much to look at but the alloy one is the bright silver one!
They all fit the 30mm crown forks (such as Z2/Z3 etc etc) but may fit others with a 30mm crown diameter. They will fit bolt-in and press-in crowns. Please double check your crown bore is 30mm before buying!
They all have the taper for the crown race and a seating lip to prevent pulling the tube up through the crown.
Post will be £5 on any steerer. Still £5 if you buy more than one as can post together. Also please check my other for sale items to combine postage to save money and to help save the world.
Anyway,
Steerers:
1. Lightweight Alloy, shot peened, NOS, 1 1/8" x 287mm total length = approx 260mm above crown (listed as a 28.6 x 260), BRAND NEW, £29
2. Cro-Mo steel, NOS, 1 1/8" x 267mm total length = approx 240mm above crown (listed as a 28.6 x 240) BRAND NEW, £20 each (I have 2 of these)
3. Cro-Mo steel, NOS, 1 1/8" x 327mm total length = approx 300mm above crown (listed as a 28.6 x 300) BRAND NEW, £24 each (I have 2 of these)
4. Cro-Mo steel, nearly new/hardly used - very close to new, not even a dab of surface rust anywhere! 1 1/8", cut to approx 245mm total length = approx 220mm above crown. Includes star nut fitted so ready to go! £18
5. Cro-Mo steel, NOS, 1" x 327mm total length = approx 300mm above crown (listed as a 25.4 x 300) BRAND NEW, hard to find now, perfect for any tall Bontrager or Fat Chance riders! The diameter at the crown is 27.2 so by luck/genius you could use this steerer in virtually any fork - in a 28.6 Pace crown for example, you would just need a 27.2 > 28.6 seatpost shim. 27.2 ID seatpost shims are readily available in loads of sizes so a super easy solution! £29
6. Shim to fit the Marzocchi 30mm crown for the above 1" steerer £5
Pic:
Not much to look at but the alloy one is the bright silver one!
