Kona front end
Project II Forks
1 1/8th, Steerer is 164mm with 33mm of thread. A-C 390mm, Spinner dropouts, rattle can paint job - paint has seen better days
Velocity Stem
Rattle can paint job with Gill_M decals, paint is chipped and decals faded
Race light bars
Cut down to 570mm wide - very light, anodising is starting to wear away
Itsa bitsa headset
Velocity headset tops, the black one is cracked around the pinch bolt, the silver one works fine - both are scuffed and scratched. Bottom Deore DX with bearing and crown race. And a bag of ball bearings.
£28 posted for the lot!
Project II Forks
1 1/8th, Steerer is 164mm with 33mm of thread. A-C 390mm, Spinner dropouts, rattle can paint job - paint has seen better days
Velocity Stem
Rattle can paint job with Gill_M decals, paint is chipped and decals faded
Race light bars
Cut down to 570mm wide - very light, anodising is starting to wear away
Itsa bitsa headset
Velocity headset tops, the black one is cracked around the pinch bolt, the silver one works fine - both are scuffed and scratched. Bottom Deore DX with bearing and crown race. And a bag of ball bearings.
£28 posted for the lot!
