SOLD
Project this one, as follows.
Frame, 19" small size, 1992 in Gator, 31.6mm seat post, poor paint condition with fading, chips, chain suck and a dent in top tube by Attitude on right side. The rear mech thread is damaged but it will have a Helicoil insert fitted to resolve this. BB axle is 108mm-XTR fit, bearings are OK. Headset bearings were shot so I've binned them. Has an original Klein head tube badge fitted and top and bottom seals are present and good. NO cracks, seat tube rear is fine. 4 of the original bottle cage bolts present. Anti-chain suck device and new bolts will be included.
Fork, right leg has a dent, fading and scratches in line with the frame. Original bolt at rear of crown area fitted.
MC1, 0' rise, 135mm, original wedge and titanium bolt fitted and all good. Width of bar has been reduced and ends have some bar end crimping.
In my opinion this is a re-paint/restoration project really but it could also just be built up and used as it is. The rear mech thread will be sorted, I'm happy to discuss refitting forks with new headset bearings, replacing BB bearings with a different length axle, fitting new cable liners, I could get this ready to just build up with parts should you wish to just get on and ride it.
I don't want to split this up really, I know MC wil be in demand followed by forks but if I was to split frame must sell first.
£700.
Any questions please ask. PayPal to friends preferred, postage not included which will be £25 in UK. Happy to post anywhere at your cost.
Cheers, Ash.
Project this one, as follows.
Frame, 19" small size, 1992 in Gator, 31.6mm seat post, poor paint condition with fading, chips, chain suck and a dent in top tube by Attitude on right side. The rear mech thread is damaged but it will have a Helicoil insert fitted to resolve this. BB axle is 108mm-XTR fit, bearings are OK. Headset bearings were shot so I've binned them. Has an original Klein head tube badge fitted and top and bottom seals are present and good. NO cracks, seat tube rear is fine. 4 of the original bottle cage bolts present. Anti-chain suck device and new bolts will be included.
Fork, right leg has a dent, fading and scratches in line with the frame. Original bolt at rear of crown area fitted.
MC1, 0' rise, 135mm, original wedge and titanium bolt fitted and all good. Width of bar has been reduced and ends have some bar end crimping.
In my opinion this is a re-paint/restoration project really but it could also just be built up and used as it is. The rear mech thread will be sorted, I'm happy to discuss refitting forks with new headset bearings, replacing BB bearings with a different length axle, fitting new cable liners, I could get this ready to just build up with parts should you wish to just get on and ride it.
I don't want to split this up really, I know MC wil be in demand followed by forks but if I was to split frame must sell first.
£700.
Any questions please ask. PayPal to friends preferred, postage not included which will be £25 in UK. Happy to post anywhere at your cost.
Cheers, Ash.
