Interest check: Dura Ace 7700 groupset (less front mech)

[garethrl]

Hi folks,
Just a quick interest check first before I take some photos over the weekend. Following the sale of a frame last weekend I now have a surplus Dura Ace 7700 series groupset, minus front mech, in very nice condition. Never crashed or ridden much in wet and grime.

Mainly I want to know if anyone would be interested in the whole gruppo for about £250, or otherwise I'll list them separately. The main details are:

- 175mm crankset with 53/39 rings and 109mm BSC BB. Some heel rub and wear to deals but rings in VGC
- STI units, 9-speed, double front, with a couple of small cosmetic marks but no tears to hoods, original cables attached
- short cage rear mech with original jockey wheels and very little wear or marks
- dual pivot brake calipers with original pads and shoes
- 12-23 cassette

I also have a wireless Flightdeck computer and a pair of SPD-R pedals (maybe 105 level) that I'd include. Could also include the pair of Bontrager Select wheels that the cassette is presently mounted on. I could also include a Sora or Tiagra front mech to complete the group, if desired.

Cheers,
Gareth.

 

[Artful Dodger]

Would have been interested but the 175ml crank set is just to big for me.
GLWS 7700 is excellant

 

[Artful Dodger]

Interested in the STi 's if you decide to split though?

 

[D_XZ]

Re:

Also interested in STI's

 

[ovlov440]

poss interested in rear mech and calipers, pending photos and prices.

 

[garethrl]

Re:

I finally took some photos last night, available on Flickr:

https://www.flickr.com/photos/33175097@ ... 177805310/

I'll link a few pics directly to this thread later once I'm back from the Tour tonight.

I'd still prefer to sell the groupset rather than split. I have a pair of Ultegra 6500 cranks that are shorter than these, though I'll need to check it they're 170 or 172.5mm. I can include them if shorter cranks would help, maybe while looking for a shorter pair of 7700s?

£250 for everything pictured and also a 12-23T cassette and wireless Flightdeck computer. The Bontrager Select wheelset that the cassette is presently mounted on could be available, subject to price.

Cheers,
Gareth.

 

[ovlov440]

Deffo interested in the rear mech and calipers if you split (depending on price).

If it makes your decision easier Artful Dodger then I have a set of 7700 cranks in 172.5mm flavour if that is all that is stopping you from purchasing the entire groupset.

viewtopic.php?f=22&t=299673

 

[garethrl]

Re:

Confirming that I have a pair of 6500 series Ultegra cranks in 170mm that I can include in case the 175mm Dura Ace ones are a bit long. They'll get you rolling while you look for replacements DAs.

Cheers,
Gareth.

 

[LeeDevelopment]

Interested in the octalink cranks.

 

[ovlov440]

Looks like there are people interested in all the components (bar the cassette). Any decision on whether you are going to split?