Wanted Hope pro2 evo freehub or xd driver cassette

[ishaw]

I have a nice rear pro2 evo hub and xd driver freehub. I would like either a shimsno freehub or xd driver cassette.

I'd consider swapping the xd driver freehub for a shimsno one if anyone is that way inclined.

I also have a pro4 shimano freehub if anyone fancies swapping for a pro2 evo?

 

[albash82]

It's possible, that I might be able to help here, with an HG pro2evo freehub. Drop me a pm and I'll see what's in the shed

 

[dyna-ti]

I've an 'as new' one. Problem is I pillaged the bearings and all bar one of the spacers for another hub(the spacer I have with it is the short one, that goes at the pawls end.) No pawls either
Its alloy, there are marks indicating a cassette was fitted at some point, but theyre pretty much tiny marks and no damage whatsoever. it came off an unbuilt RS hub so cant say brand new.
Say £25 inc 2nd class recorded.

 

[ishaw]

Thanks, I have pawls and springs. Might have spacers too.

Do the rs ones fit an evo 2 axle?

 

[dyna-ti]

Sorry, it wasnt the RS, i thought that was the standard road hub, but after looking at the hope spec again I see it was actually the pro 3 mono(the rs is silver freehub, the pro3 is gold).But yes, far as i can tell its the same freehub body.

Pro 3 mono freehub part number - HUB520
https://www.hopetech.com/_repository/1/documents/PRO3MonoRear-Assy.pdfPro 2 evo freehub part number - HUB520
https://www.hopetech.com/_repository/1/documents/ProIIEVORearExploded.pdf

 

[mdvineng]

I might have a spacer or can make one from scratch. Dimensions required though as I have about 3 spacers with no numbers on them.

 

[ishaw]

Thanks, let me check as I have a set of lro 3 hubs and when I replaced the bearings I seemed to recall there was one of the three that was an odd size, but I may be co fusing 'odd' with the standard pro2 sizes rather than the evo.