Halston inverted Forks/ manitou's ALL REDUCED

johnnypie13

Gold Trader
Feedback
View
My overdraft has hit critical so unfortunately some of my parts have to go to allow me to keep my bikes all prices include UK postage sensible offers are welcome as are multiple buy discounts have more pictures if required also any info needed just message me

USE rigid forks nice condition very reluctant sale £100 ovno posted UK weight 979 grammes SOLD

Fox 100RLC good condition was told they were serviced 3 months before i bought them £120 ovno posted UK SOLD


Halston Inverted Forks i have cleaned them out and the majority of the elastomers are ok could do with a couple replaced though £55 posted UK i have the leg covers but they are knackered (reduced to £45) £40 if collected
P1000018.jpg


Manitou SX very good condition only a few marks £60 now £55 posted UK £50 if collected
P1000024.jpg


300lx Crankset average condition rings look good will need polished and care will need to be taken with the drive side removal thread is currently 7 / 10 condition £15 posted UK reduced to £12
P1000025.jpg


300lx rear mech nice condition £8 posted UK (reduced to £5.50)
P1000026.jpg


Ritchey comp seat post 31.6 not bad condition marks consistent with use and fitting £15 Posted UK both reduced to £10 each
Easton EA50 31.6 seat post again not bad condition marks consistent with use and fitting £15 posted UK
P1000021.jpg


seven speed shifter / lever combo 7 speed changer is good but the other is a bit sticky i have de-greased and re-greased so might free up seems to work at the minute though £10 now £8 posted UK
P1000022.jpg


Deore LX parallax and a 517 SUP wheel slight movement no more than 1mm should straighten fine if you know what you doing £30 now £28 posted will include a skewer if needed (doesn't include tyre) £22 if collected
P1000027.jpg

P1000028.jpg
 
Wold Ranger":3irvkx3r said:
johnnypie13":3irvkx3r said:
Canuck":3irvkx3r said:
Also interested in the Use forks, what is the a-c please?

370mm approx
Hell that's short? Is that measuring from the centre of the axle line to the botton of where the headset crownrace sits please?

It's from the bottom of the fork crown where the leg comes out to the end of the fork leg
 
Back
Top