petey_pants
Retro Guru
Totally updated May 28
XTR rear mech. Some light scuffs but works excellent. SOLD
XTR front mech. Bought wrong swing type for my bike. This is dual pull 34.9mm. No play. £25 posted
SRAM XGEN 34.9 front mech. Dual pull. No play. £10 posted
SHIMANO Front mech size converter. 34.9 mech to 28.6 frame conversion. SOLD
SHIMANO XT front mech. 31.8 dia, bottom pull. Good nick, has a small amount of play but still shifts fine. £10 posted
SHIMANO XTR front mech. SOLD
MAGURA Red Hydraulics front. Almost new pads and no leaks. £20 posted
HOPE BULB 20mm (black) on Mavic D321 36 hole. Practically indestructible, but not heavy. The usual marks, but good to go. £55 posted.
GOLDTEC XC Disc hub on Mavic D521. Hub only weigh's 180 grams. Yet strong enough for trials and jumping. Both V and Disc compatible (6 or 4 bolt). Silky smooth bearings and made by Stif cycles with SAP spokes. New £91.99 (Goldtec website). £45 posted.
GOLDTEC SAMS Ti hub on Mavic D521. Titanium freehub and oil lubrication system. Super tough yet light. Again V or disc (4 bolt) and comes with a 160mm disc. Bearings ok, but not as smooth as fronts. New £126.99 (Goldtec Website). £55 posted.
Commencal dropouts. Both sides. used 3 times then swapped for bolt through. £20 posted
HOPE Disc Mount Adaptor Post to IS 160mm £5 posted
HOPE Disc Mount Adaptor Rear Post to IS 203mm. £5 posted
BRAND NEW SRAM PG950 Cassette 11-32. £22.50 posted
SHIMANO DEORE V brake with cable. Used but plenty of life left. £8 posted
RETRO Titec Seat post in silver. 27.0mm diameter and 350mm long. Scuffing but still still good to go. £10 posted
Shimano SG D-28 alloy chainring. Never used, but a few scuffs from being in the tool box. £5 posted
Qranc Riser bars (polished). There scrached but could probably be polished up again. 25.4 clamp. £10 posted
1-BEAM Premium Product seatpost black. Brand new in box. 25.4 dia, but can be shimmed to fit a bigger frame. RRP £25. £10 posted
XTR rear mech. Some light scuffs but works excellent. SOLD
XTR front mech. Bought wrong swing type for my bike. This is dual pull 34.9mm. No play. £25 posted
SRAM XGEN 34.9 front mech. Dual pull. No play. £10 posted
SHIMANO Front mech size converter. 34.9 mech to 28.6 frame conversion. SOLD
SHIMANO XT front mech. 31.8 dia, bottom pull. Good nick, has a small amount of play but still shifts fine. £10 posted
SHIMANO XTR front mech. SOLD
MAGURA Red Hydraulics front. Almost new pads and no leaks. £20 posted
HOPE BULB 20mm (black) on Mavic D321 36 hole. Practically indestructible, but not heavy. The usual marks, but good to go. £55 posted.
GOLDTEC XC Disc hub on Mavic D521. Hub only weigh's 180 grams. Yet strong enough for trials and jumping. Both V and Disc compatible (6 or 4 bolt). Silky smooth bearings and made by Stif cycles with SAP spokes. New £91.99 (Goldtec website). £45 posted.
GOLDTEC SAMS Ti hub on Mavic D521. Titanium freehub and oil lubrication system. Super tough yet light. Again V or disc (4 bolt) and comes with a 160mm disc. Bearings ok, but not as smooth as fronts. New £126.99 (Goldtec Website). £55 posted.
Commencal dropouts. Both sides. used 3 times then swapped for bolt through. £20 posted
HOPE Disc Mount Adaptor Post to IS 160mm £5 posted
HOPE Disc Mount Adaptor Rear Post to IS 203mm. £5 posted
BRAND NEW SRAM PG950 Cassette 11-32. £22.50 posted
SHIMANO DEORE V brake with cable. Used but plenty of life left. £8 posted
RETRO Titec Seat post in silver. 27.0mm diameter and 350mm long. Scuffing but still still good to go. £10 posted
Shimano SG D-28 alloy chainring. Never used, but a few scuffs from being in the tool box. £5 posted
Qranc Riser bars (polished). There scrached but could probably be polished up again. 25.4 clamp. £10 posted
1-BEAM Premium Product seatpost black. Brand new in box. 25.4 dia, but can be shimmed to fit a bigger frame. RRP £25. £10 posted
Needless to say I won't use them again. 
