FS Merlin XLM frame only. SOLD

[Harryburgundy]

FS Merlin XLM

Here is the build thread.

http://www.retrobike.co.uk/forum/viewto ... n&start=45

I finished the build but am finding it doesn't quite fit...a little short on the top-tube for me. I have tried a longer stem but still not for me.

This sale thread is for the frame only.

Seat-tube is 18" centre to top
Seat-tube is 16" centre to centre (of top-tube)
Top tube is 21.5" centre to centre actual and a bit longer effective
Head-tube is 4"
Takes 27.2mm seat-post
BB is 68mm
Head-tube is 1&1/8th
The frame is 2002/2003 right on the cusp when Merlin were changing to disc brake etc. This frame was ordered by the original owner who I bought it off. He specified no V brake studs but the cable stops are not hydraulic friendly so you have to use adaptors. I have used self adhesive cable guides under the top-tube for a clean look. The frame uses Merlin's disc adaptor.
Metal head-tube badge.
Original decals are excellent (unusually so for a Merlin)
A little cable rub that I have not cleaned off as the frame is just fab anyway. No dings etc etc


Weight is 3lb 1oz

Sale price of £750 + shipping and is for the frame only. If you fancy the DK forks add £200. If you want the black CK headset add £50.

Please reply here followed by a pm if you are interested.

Oh...if I sell this I will buy another DK frame with disc mounts that I know is available locally. If you have similar we could look into PX etc

Ta
Carl

 

[Awkward Kid]

I'm very tempted by this Carl. Will have a good think and drop you a PM

 

[Harryburgundy]

Okay chap.

 

[hrhansen]

would you sell the King fitting on its own?

 

[GT-Steve]

Thank god this is too small for me, or I'd be in trouble right now..

GLWS fella..

 

[Harryburgundy]

Thank god this is too small for me, or I'd be in trouble right now..

GLWS fella..

Thanks Steve

I am interested in equal quality steel frame disc only...seat-tube needs to be 17.5-18.5" dependent on slope of top-tube. Top-tube wants to be 22.25-22.5"
IF Dekerf Soulcraft etc...the usual suspects

 

[AmberGambler]

How much for the disc break adapter? Would be perfect for my Merlin

 

[Harryburgundy]

How much for the disc break adapter? Would be perfect for my Merlin

£750 + shipping. Really...think about it, who in their right mind would sell the disc adaptor leaving the frame with no way of attaching a brake

Good luck in your search

The most beautiful ti frame you can buy (mmm..maybe a Kish beats it) still for sale

 

[Carsten G]

How tall are you Carl ?

I might be interested but have to find some info about the frame, length of suspension its build to and so.

What are the problem with the cable holders ?

Last will you send to Denmark

Cheers
Carsten

 

[Harryburgundy]

How tall are you Carl ?

I might be interested but have to find some info about the frame, length of suspension its build to and so.

What are the problem with the cable holders ?

Last will you send to Denmark

Cheers
Carsten

Hi Carsten

I am about 5'9" or about 1.75m. My legs are short and torso long.

The suspension would be 80mm travel

There is not a problem with the cable holders...it is just that the cable holders are not hydraulic friendly so you have to use adaptors for the hydraulic rear hose.
I have used stick-on cable guides like these under the top-tube and it works swell...quite neat really.
http://www.bicyclehero.com/gb/jagwire-a ... ca056.html
Shipping to Denmark is fine but I would have to check the cost of shipping for you. Basic shipping by Parcelforce is about £22 but we would need to add insurance.

Carl