FS - last chance before ebay, loads and new pics

timdrayton1

Retro Guru
Fork is in very good nick, stamped 1993 on the steerer.

No dents, some scrapes and cable rub but nothing major, stickers are lightly scuffed but this is very difficult to see, fantastic condition.

Joe Murray branded Velocity quil stem, some light rust but nothing too bad, would come off with a bit of work....

Stickers are lifting in places (see pics) and it is missing the stem bolt and the expander, but these should be easily sourced...

£20 posted for the forks

£5 posted the stem

emails [email protected]

forks1.jpg


forks2.jpg


forks3.jpg


forks4.jpg


stem2.jpg


Some other bits

Ergon Grips with integrated barends, size small, barends have been painted which is a bit scruffy, but could be stripped or repainted>? includes bolts and grips have plenty of life left

£6 posted

P16-10-09_1550.jpg


Club roost IDB150 "Duralumin" 2014-T6/580mm/5degree alu flat bars weigh 165g. lovely condition, logos intact, some crimping from bar ends but not noticeable when grips fitted...

£8.00 posted

P16-10-09_1549.jpg


unbranded stem, all fine just missing 1 bolt, 25.4 clamp 90mm 6 degree

£4 posted

blackgiantstem.jpg


10mm canti/V brake bosses - £2 posted

cantibrace.jpg


Flat bar, 8 or 10 degree bend, about 600mm 25.4 tatty white paint, could benefit from stripping and polish!

£4 posted

P10-10-09_1118.jpg


Dia compe front canti set, lovely condition - £6 posted

P09-10-09_1240.jpg


Sram 8 speed gripshifters, x3 speed left is working fine, right wont hold together, so good for parts only, both £5 posted

gripshift.jpg


Ski type Barends missing the bolts, some rust - £2.00 posted

barends.jpg


Deore 9 speed mech, tatty but works, jockey wheel bolt has a non standard bolt but fully working - £5 posted

deoremech.jpg


Shimano front mech off an old hybrid, top pull, 3 speed, and about 28mm clamp size - £2.00 posted

frontmech.jpg


-------------------------------------------------------------

SOLD STUFF

Alivio rear mech, black 9 speed, works bit scuffed, £7.50 posted - SOLD

Black 8 speed vbrake/shifters/stis £11 posted - SOLD

34.9 giant bolt type seatclamp, black - £2.50 posted SOLD

Lights, no mounts, front power beam led, rear Smart red led, £5 posted SOLD

Selle San Marco Flite Max, very comfy and in good condition, some marks to the rails tho, not visible once fitted - £7.50 posted - SOLD

27.2 seatpost lots of insertion marks up to 2 " below clamp, ok for pub bike £2.50 posted - SOLD
 
what is the steerer length? i need 1 1/8 x 170mm. if they are i'll have them subject to you posting a price! (forum rules aswel by the way)

cheers :D
 
I make the steere 28.5 mm so i guess 1,1/8?

its only 140 long, the thread at the top is 30 mm long and thats included in the 140mm
 
seatpost, alivio mech, selle italia saddle, sti shifter brakes all sold, everything else still available and open to offers?
 
May be interested in the steerer - I'm waiting for a frame to arrive to start a build so would need to measure.
 
CAS hope i didnt cause any confusion, the steerer in question is attached to the P2 forks (which are still available at the minute!!!)

bump btw
 
No worries - I was posting in a hurry last time and thinking about steerer length - I shall be looking for the whole thing if suitable. I'm waiting for a frame to arrive but I'm not sure either about the fork length I need or the steerer length at the moment.

Sorry not to be more specific
 
Back
Top