Anyone work in dust extraction?

[IDB1]

Been looking for some (reasonably priced) dust extraction hose.. the 4" diameter heavy duty clear plastic reinforced stuff like this
http://cgi.ebay.co.uk/Flexible-Dust-Ext ... 500wt_1074

Around £2/metre would be ideal...

 

[legrandefromage]

Marin man works in piss extraction...

 

[marin man]

I do my best.....

 

[IDB1]

I'll always be 2nd best.....

Sorry mm . . . . . .

 

[marin man]

I'll always be the best.....

Sorry Ian . . . . . .

 

[Supratada]

Axminster do all manner of extraction supplies and seem to be quite reasonable price wise.

http://www.axminster.co.uk/dust-extraction-and-wood-waste-dept811887_pg1/

 

[IDB1]

Hmmm... £12/metre.... bit too far off my budget but thanks for the link

 

[dyna-ti]

£2/m is a rather small budget for this kind of thing :? ,£9 or £10 is closer to what this kind of kit usually costs
What is it for exactly?
Chippings[planer/thicknesser/lathe/spindlemoulder]
Or
Dust[Sawbench/bandsaw,radial arm saw]
for chippings 4" is about the minimum bore you'll need whereas with dust a minimum of 2" is fine,you can even reduce that down to 1" if needed.
It's all about air volume

It it's router set into a table a dust extractor with a low volume high pressure hose will capture more than a larger diameter hose where the pressure is reduced

3 weeks ago i had an elektra beckum chippings extractor with 30" of high end crushproof 6" hosing for sale.
Sorry gone now

Axminster tools is a bloody handy company

 

[cyfa2809]

this guy?

http://www.youtube.com/watch?v=M-XLoHkhZeU&feature=related

 

[IDB1]

What is it for exactly?
Chippings[planer/thicknesser/lathe/spindlemoulder]
Or
Dust[Sawbench/bandsaw,radial arm saw]
for chippings 4" is about the minimum bore you'll need whereas with dust a minimum of 2" is fine,you can even reduce that down to 1" if needed.
It's all about air volume

It's for enriching the ferrets environment

No... really it is....

Using the 4" drainage pipe (the flexi stuff) at the moment but I really could do with something a little more bendy... and less brittle...