AMP Research F3 XC, 16" GT Tequesta, 18" Trek 6500

Mrs Goggins

Dirt Disciple
I've got a few items here that need to go, I will post anywhere and accept paypal. Located in Manchester if you would like to view. I have sold a couple of bits on here before and have 100% positive Ebay history.

AMP Research F3 XC fork. Can take canti's or disk brake, 2.25" travel, 200mm 1 1/8" steerer, 445mm from crown to dropouts. Weighs 2.8LBS/1.27Kgs! Has an EIBACH spring. Overall in good condition with a few scratches on the legs. Only downside is the steerer cut and star nut installation is a bit wonky, but works fine. If you cut a few mm off this wouldn't matter anyway. I'm looking for £120 plus delivery.

Trek 6500ZX Aluminium Frame, Seat tube 18" c-c / 19.5" c-t. Top Tube 23". Comes with UN52 BB, seat post, stem, headset, and Rock Shox Indy C's. The frame has been fully stripped and rebuilt so nothing is seized in and the headset has been serviced and is ready to go. The BB isn't perfectly smooth but doen't have any play, and still has life left in it. Frame and forks are in pretty good condition overall but has some scratches as you would expect. £100 plus postage

GT Tequesta Reynolds 525 Frame, Seat tube 16" c-c / 18" c-t. Top tube 21" c-c. Head tube 4" long to take 1 1/8 steerer. 68mm BB shell with good threads. Not sure on exact seat tube diameter, it seems to be around 29.6mm, included is a shim so it takes a 26.8mm post with no problems. Really nice looking frame that I would keep if only it was a bit bigger. Quite a few scratches/scuffs especially on the rear end. £80 plus postage.

More pictures available on request, thanks!
 

Attachments

  • resized_11022009275.webp
    resized_11022009275.webp
    76.3 KB · Views: 2,067
  • resized_11022009288.webp
    resized_11022009288.webp
    105.2 KB · Views: 2,067
  • resized_11022009290.webp
    resized_11022009290.webp
    59.3 KB · Views: 2,067
  • resized_11022009296.webp
    resized_11022009296.webp
    42.1 KB · Views: 2,067
Here are some pictures of the steerer, its just been cut at a bit of an angle (not by me!) and the star nut is also at an angle. If you cut 5mm off the steerer and pressed a new nut in it would be perfect. I can do this with the proper tools, pipe cutter etc, if anyone wants.
 

Attachments

  • resized_11022009292.webp
    resized_11022009292.webp
    35.6 KB · Views: 1,891
  • resized_12022009300.webp
    resized_12022009300.webp
    17 KB · Views: 1,891
  • resized_12022009302.webp
    resized_12022009302.webp
    17.7 KB · Views: 1,891
very interested in the amps f3's will talk to swmbo
madwife.gif

and get back to you
 
AMP forks now sold. Cheers Alan!

Frames are still available, open to offers, or they will go on ebay this week.

Cheers, Richard
 
Back
Top