GoldSpanner
Dirt Disciple
Had bought all of this stuff with the intention of using it on a particular frame, but now have given up on it for a better (and cheaper) frame, so all of this stuff is no longer needed. Pickup from Brighton, or can post at your cost.
Tektro brakes pair, standard reach, no pads, fairly tatty, but full working order - £10
Tektro R369 pair, long drop (57-67), for mudguard, large tyres, or for using 700c wheels on an old frame intended for 27" wheels. Non-recessed nut. New and unused - £30
Kalloy alloy seatpost, single bolt clamp, 25.2 diameter, inserted once - £10
Dia compe Gran compe aero brake levers, were put on bars but never used, almost perfect condition - £20
http://i.imgur.com/vA7vH6hl.jpg
Tange Levin 1" threaded headset, new and unused, copy of a campy record apparently - £15
3x Dia Compe top tube brake cable house guides, new and unused, for standard diameter top tube as per steel frame - £2 each
Huret downtube shifter clamp, machined/ modified (not by me) to accept modern indexed downtube shifters, never used it myself, looks like nos - £20
http://i.imgur.com/HUcZdw6l.jpg
1" threaded steel forks, not sure what bike they came from, were originally painted purple, I stripped them with the intent of respraying, but they are no longer needed. Chrome underneath in decent condition, could certainly be used as is, but I would recommend a respray. 100mm spacing for 700c wheel, recessed brake drilling, perfectly aligned, 210mm steerer, with '57' stamped on the tube, so presumably came from a 57 frame, although there's enough thread to be cut down, or at a push would probably be fine for a 58-59 frame - £35
http://i.imgur.com/h0dk2Cml.jpg
Dibs followed by a PM
Tektro brakes pair, standard reach, no pads, fairly tatty, but full working order - £10
Tektro R369 pair, long drop (57-67), for mudguard, large tyres, or for using 700c wheels on an old frame intended for 27" wheels. Non-recessed nut. New and unused - £30
Kalloy alloy seatpost, single bolt clamp, 25.2 diameter, inserted once - £10
Dia compe Gran compe aero brake levers, were put on bars but never used, almost perfect condition - £20
http://i.imgur.com/vA7vH6hl.jpg
Tange Levin 1" threaded headset, new and unused, copy of a campy record apparently - £15
3x Dia Compe top tube brake cable house guides, new and unused, for standard diameter top tube as per steel frame - £2 each
Huret downtube shifter clamp, machined/ modified (not by me) to accept modern indexed downtube shifters, never used it myself, looks like nos - £20
http://i.imgur.com/HUcZdw6l.jpg
1" threaded steel forks, not sure what bike they came from, were originally painted purple, I stripped them with the intent of respraying, but they are no longer needed. Chrome underneath in decent condition, could certainly be used as is, but I would recommend a respray. 100mm spacing for 700c wheel, recessed brake drilling, perfectly aligned, 210mm steerer, with '57' stamped on the tube, so presumably came from a 57 frame, although there's enough thread to be cut down, or at a push would probably be fine for a 58-59 frame - £35
http://i.imgur.com/h0dk2Cml.jpg
Dibs followed by a PM
