Fatal Swan
Senior Retro Guru
- Feedback
- View
I'm selling my 1994 Raleigh DynaTech Diablo STX frameset. It has a couple of issues (detailed below) but I'm selling at a just £50 all in, but it must be collected in Co. Durham (DH7 postcode) before the 2nd January.
The listing is for the frame (titanium main tubes), UGLI fork (steel version), original Dia Compe headset as fitted, stem, original Ti bar (one end has some crimping from clamping the bar ends). modern Shimano bottom bracket, XT front mech, and various purple bolts as pictured.
I bought it about 5 years ago and it's been kept at my in-laws' house for riding on the odd stay with the family. Will check the frame size, I guess it's around 18". Here's my build thread: viewtopic.php?f=6&t=292714
Condition is as pictured, with two issues. One, half the seat binder bolt is still in the clamp and needs to be removed, presumably by drilling it out carefully (the side with the bolt came out). Two, the 'stop' at the bottom of the derailleur hanger is worn and on a regular rear mech the b-adjustment screw wouldn't reliably stop against it. To resolve this I used a Shimano Shadow-style rear mech very successfully - I believe the SRAM ones have a similar mechanism.
Other parts from the original build available upon request.
Edit - frameset sold pending collection mid-February
The listing is for the frame (titanium main tubes), UGLI fork (steel version), original Dia Compe headset as fitted, stem, original Ti bar (one end has some crimping from clamping the bar ends). modern Shimano bottom bracket, XT front mech, and various purple bolts as pictured.
I bought it about 5 years ago and it's been kept at my in-laws' house for riding on the odd stay with the family. Will check the frame size, I guess it's around 18". Here's my build thread: viewtopic.php?f=6&t=292714
Condition is as pictured, with two issues. One, half the seat binder bolt is still in the clamp and needs to be removed, presumably by drilling it out carefully (the side with the bolt came out). Two, the 'stop' at the bottom of the derailleur hanger is worn and on a regular rear mech the b-adjustment screw wouldn't reliably stop against it. To resolve this I used a Shimano Shadow-style rear mech very successfully - I believe the SRAM ones have a similar mechanism.
Other parts from the original build available upon request.
Edit - frameset sold pending collection mid-February