2000 Scott Boulder rebuild.

Dface

Retro Guru
See if I can make it roadworthy for less than a tenner.
 

Attachments

  • IMG_3088.webp
    IMG_3088.webp
    1.3 MB · Views: 9
  • IMG_3099.webp
    IMG_3099.webp
    834.6 KB · Views: 6
  • IMG_3096.webp
    IMG_3096.webp
    783.6 KB · Views: 5
  • IMG_3095.webp
    IMG_3095.webp
    753.3 KB · Views: 5
  • IMG_3094.webp
    IMG_3094.webp
    949.4 KB · Views: 4
  • IMG_3093.webp
    IMG_3093.webp
    878.8 KB · Views: 4
  • IMG_3092.webp
    IMG_3092.webp
    950.9 KB · Views: 4
  • IMG_3091.webp
    IMG_3091.webp
    897.7 KB · Views: 4
  • IMG_3089.webp
    IMG_3089.webp
    821.8 KB · Views: 7
  • IMG_3097.webp
    IMG_3097.webp
    1.1 MB · Views: 8
Looking good!

From the state of the grips, brake blocks, and chain rings it doesn't look like it's seen many miles.

Might even be able to get change out of that tenner!
 
Looking good!

From the state of the grips, brake blocks, and chain rings it doesn't look like it's seen many miles.

Might even be able to get change out of that tenner!
Paint is nice and shiny. Plenty of chips on it though. I reckon its last 2 miles have been getting moved around the garage from wall to wall.
 
Bit of a flash in the pan but it only wanted a clean, couple of rubber boots for the v pipes, the gear levers unseizing and a quick link to rejoin the chain that wasn’t worn. Quite tidy really.
 

Attachments

  • IMG_3203.webp
    IMG_3203.webp
    826 KB · Views: 14
  • IMG_3204.webp
    IMG_3204.webp
    724.5 KB · Views: 12
  • IMG_3205.webp
    IMG_3205.webp
    407.6 KB · Views: 9
  • IMG_3206.webp
    IMG_3206.webp
    358.3 KB · Views: 9
  • IMG_3207.webp
    IMG_3207.webp
    362.1 KB · Views: 9
  • IMG_3209.webp
    IMG_3209.webp
    747.9 KB · Views: 7
  • IMG_3210.webp
    IMG_3210.webp
    412.4 KB · Views: 8
  • IMG_3208.webp
    IMG_3208.webp
    363.9 KB · Views: 14
Back
Top