I've a 2005 P7 frame which has had a recent respray and decal set and comes with a Woodman seat clamp.
A previous owner had removed the cable guides and rear V brake mounts (very professionally). This means that you won't be able to run a front mech without a bolt on cable stop. However the frame is perfect for a 1x10 or 1x9 with a full length cable outer or singlespeed setup with a tensioner.
The frame has a rear disc mount, 1 1/8" headtube and is design for 120/130mm travel forks. It's free from any dents, dings or cracks.
The frame measurement are
Seat tube - 17" c to t
15" c to c
Top tube - 22.5"
Looking for £80 posted
A previous owner had removed the cable guides and rear V brake mounts (very professionally). This means that you won't be able to run a front mech without a bolt on cable stop. However the frame is perfect for a 1x10 or 1x9 with a full length cable outer or singlespeed setup with a tensioner.
The frame has a rear disc mount, 1 1/8" headtube and is design for 120/130mm travel forks. It's free from any dents, dings or cracks.
The frame measurement are
Seat tube - 17" c to t
15" c to c
Top tube - 22.5"
Looking for £80 posted
