Retrorockit's latest activity

  • R
    Retrorockit replied to the thread Rene HERSE Cycles tech info..
    DH racers at MTBR will never use his tires. I mean if coasting down mountains is what cycling is all about so be it. But XC racers, CX...
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    TPU definitely holds air better. Latex is supposed to be puncture resistant But I've had a wire long enough to go through a Tannus liner...
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    The RH sealant is working so far. A week from now I'll know more about the water/ Latex situation. I suppose some people may wonder why...
  • R
    Retrorockit replied to the thread Rene HERSE Cycles tech info..
    His tire tech is feeding back into road racing (where it came from) in larger sizes. It's probably going to do the same thing in CX, and...
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    One type of flat that sealant is particularly good for are slow leaks (as in more than one) caused by small wires in the road from blown...
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    On this bike butyl without sealant would probably be OK. The sealed tubes thing has been so good on the urban Ebike I want to see if I...
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    OK one more time. the Rene HERSE TPU tube in the front tire is just sitting there laughing at all of this. Polished Metal stem...
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    This is the glue issue I'm having. Since gravel racing tires don't have reflective sidewalls, and I'm running disc brakes with the UB...
    • 1744723413916.webp
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    I broke down the tire today. No sealant leakage. The tube was deformed at the spoke holes next to the valve stem. 2 layers of plastic...
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    I always use metal automotive stem caps on Schraders. They seal with an O ring and you can hear a puff if the stem is leaking. Some for...
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    Looking at Sckwalbes site, they offer a heavy duty TPU tube for MTB with Schrader, and another with Presta that's apparently lighter...
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    Thanks for sharing that experience. I think I used Stan's Tubeless plastic rim tape because it's what I had at the time. So I might be...
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    I took a ride at 40psi today. It sharpened up the handling of the XC bike on pavement. 33psi was cushy but a little bouncy too. The...
  • R
    Retrorockit replied to the thread Rene HERSE Cycles tech info..
    I just found a quote from Jan Heine. "We developed 26″ tires in three different sizes because I wanted the 2.3″-wide Rat Trap Pass and...
  • R
    Retrorockit replied to the thread Latex inner tubes updated.
    I have no experience with tubeless conversions. But users with similar light weight tires complain that it takes up to 3 days for them...
Back
Top