ishaw's latest activity

The bearing tools arrived today so looks like I'll be tackling this at the weekend. With the cables in place life should be easier...

I may be able to help with the m970.stuff.

I managed to find the brake I knew I had, but it's a right hand lever I'm afraid. I may have a couple of Deore levers, need to check I...

I don't think I have ergon branded ones but do have a few grips in this style if that's of interest?

It's just topping up so will give that a go first. I've postponed the plan for now, may as well do the full strip and rebuild at the...

I'm used to bleeding brakes, done it for years, hope, Shimano, magura, avid/SRAM, Hayes, formula to name some. I happened to watch a...

I may actually have a full rear brake. Remember buying one as part of a bundle of bits I needed and was keeping as a spare as I have a...

Looking for something to adorn a nice set of cranks running a nos outer and granny. 110bcd, 36 or 38t, Shimano ideally, silver with...

Yes, i-spec EV is one of the 3 I think i-spec options Shimano have created.

I've got some Deore levers of the same style I'm not using, you could swap over or pinch the bit you need from it? Saw this, maybe a...

I'll have a play tonight and see what's what.

Yes, weird as was fine before the wheel and cassette swap. I'll faff around and see if I can sort it through cable replacing and b scee...

If the spacers are out back on incorrectly, you can end up with the BB cup too far outboard which will then bind against the arm. Are...

The correct process is to remove the self extracting covers, freeing the captive bolts. With the bolts removed you can see the splines...

Rest assured I've done that, it's still dropping slowly even after a few turns on the adjuster, which then if course messes with the...