Very nice indeed mate. What a bike to rescue. Hopefully get mine off to powdercoaters in next couple of weeks, then I can get on with the rebuild.
Nice job :)
Can anyone recommend a good and reasonably priced powdercoaters in the Ipswich area? Have got quotes from a couple but they seem a bit steep for a rigid frame and forks, both companies quoting around the £75 mark! Does that seem a lot to you guys or am I just getting tight in my old age ;)...
What is the best over the counter product for removing paint? Want to strip back my bars and stem to bare metal so I'm able to do a decent respray.
Thanks in advance ;)
My current seat post is 26.4mm diameter. I was wondering if I could get away with a 26.2mm diameter post and clamp up a little tighter? Thoughts please.
Cheers peeps
This is aimed at I Beleieve In Fixies - Just so i'm 100% clear, it's the length of the steerer tube minus the headtube length = headset stack height. Should i be measuring the steerer tube length from the crown race as the original is still on the forks?
Cheers
Great info, thanks chaps. Will have to get my measuring stick out and do a little calculating as the original headset is long gone. Once again, cheers :)
Hi everyone. Need to know if the headset stack height is important for a threaded headset on my 1989 Saracen Tufftrax? Need a new one for my restoration project but currently has threadless and a-head stem :oops: , which I'm removing and going back to the original forks and quill stem...