Recent content by 94chas

Hi all can anybody help me to identify this frame it don,t seem to have a serial number think its about 1980s in excellent condition unfortunately i don,t have the forks 21 1/2".Any idea of value before it goes on ebay. Many Thanks Regards Chas.

Thanks for that was running 52/42 and freewheel 13/22 and finding it abit high so swapped the 42 for a 39(smallest my campag.cranks will take) made quite a difference so now going to swop the rear freewheel friends given me a 13/24 freewheel so going to try that,might get away without having to...

Re: Yes old ned has either got one or has owned one in the past,have seen a picture on here some time ago.Think it was white with red stickers. Don,t think there are many left now most were produced between 1985-90. I know of one 753 buzz time trial tandem still in...

Re: Very nice machine,what size chain rings are you running,does the rear mech.cope ok,

Hi all few pics of my Buzz 753 tubing and cinelli lugs aero bottom bracket campag ends and seat pin pinch bolt.All campag.chorus indexing gears 3ttt stem and bars,rolls saddle campag.l/f record hubs 28 spoke wobler rims.

Re: Hi Guys thank you for your replys my cranks are 1st generation chorus the rear mech.is indexing 7 speed chorus my friend has sent me a 39 tooth stronglight chain ring which he says will fit so I,ll try this first,if its not low enough I,ll go up to 24 tooth on the rear sprocket...

Hi All finding my gearing abit high for the hills around here have 22 tooth rear and 42 front is it best to go smaller on the front have seen 39 tooth on ebay, or bigger on the back have seen a 7 speed shimano block with 28 tooth down to 14 tooth. Any Thoughts...

Re: Hi All my friend gave me this stand when he moved over to carbon frames,very useful.

Re: Slit it with a hacksaw blade then collapse it wouldn,t go near it with heat.

Re: Hi if its to tight for a spanner I hold the cup in my large bench mounted vice and use the frame as a lever,never failed me yet!!!!!!!!!

Re: Hi had mavic 630 cranks and bottom bracket on mine removed the cranks and fitted campag chorus they fitted straight on no chain alignment required this was 20 years ago their still on and im still riding it

Re: Thanks for replys guys will have to do some more investigation before it goes up for sale. Regards Chas

Hi all can anybody tell us what model rotrax this is been in my friends garage for years he thinks its 50,s orgional paintwork any idea of value he isn,t going to use it anymore. Many Thanks Regards Chas

Re: Hi Have got wobler tx on mine.