I've been meaning to clear out my larger spares for ages, just haven't got round to it until today. Please see my list below and pics, prices include postage within the UK...
Cannondale Caad2 frame, black, 18", circa 1997, 1" 1/8th headtube. Bought a few years back but recently replaced by a cindercone - £60 - SOLD
Manitou EFC, normal dropouts, 1" 1/8th steerer approx 190mm. Bought off ebay as I always wanted some but as I got some RC36s I've never fitted them, previous owner was on here and said they'd been serviced, still have the damper unit and have springs. - £60 - SOLD
Rockshox Judy XC, 1997 I think , 1" 1/8th steerer approx 200mm. Bought NOS last year, and ridden three maybe four times in the dry. - £60 - SOLD
Kona P2, 1" 1/8th threaded steerer approx 140mm with 32mm thread. Came with my cindercone frame but not needed. They're kind of a bronze/gold colour, measure approx 41cm axle to crown. - £30
Xlite DH stem, black, 50mm, regular 25.4 clamp. Scuffed on the underside but fine elsewhere. - £15
XT rear mech - £18 - SOLD
Hope brake, original non-sided lever, with spare lever bracket mount and piston, No.3 caliper. 164cm hose. No pads, probably needs fluid, not sure about seals. - £20
Hope 04 calipers and levers. Came off my Santa Cruz Super 8, Calipers are both 'Boxxer' mount, I think you need a +20mm adapter to use them on regular mounts but might be mistaken. Front hose 86cm, Rear hose 120cm. Calipers had new seal kit fitted, and have pads. Levers might need servicing. Rear hose probably needs replacing. - £45
Any questions just ask!
Cannondale Caad2 frame, black, 18", circa 1997, 1" 1/8th headtube. Bought a few years back but recently replaced by a cindercone - £60 - SOLD
Manitou EFC, normal dropouts, 1" 1/8th steerer approx 190mm. Bought off ebay as I always wanted some but as I got some RC36s I've never fitted them, previous owner was on here and said they'd been serviced, still have the damper unit and have springs. - £60 - SOLD
Rockshox Judy XC, 1997 I think , 1" 1/8th steerer approx 200mm. Bought NOS last year, and ridden three maybe four times in the dry. - £60 - SOLD
Kona P2, 1" 1/8th threaded steerer approx 140mm with 32mm thread. Came with my cindercone frame but not needed. They're kind of a bronze/gold colour, measure approx 41cm axle to crown. - £30
Xlite DH stem, black, 50mm, regular 25.4 clamp. Scuffed on the underside but fine elsewhere. - £15
XT rear mech - £18 - SOLD
Hope brake, original non-sided lever, with spare lever bracket mount and piston, No.3 caliper. 164cm hose. No pads, probably needs fluid, not sure about seals. - £20
Hope 04 calipers and levers. Came off my Santa Cruz Super 8, Calipers are both 'Boxxer' mount, I think you need a +20mm adapter to use them on regular mounts but might be mistaken. Front hose 86cm, Rear hose 120cm. Calipers had new seal kit fitted, and have pads. Levers might need servicing. Rear hose probably needs replacing. - £45
Any questions just ask!
I wish I could buy them back :cry:
