5 bolt cranks, compact 94 bcd
- Thread starter robdem
- Start date
- Feedback
- View
Hi Robdem,
I have some lx cranks from about 93/4 can check model number if interetsed, rings are chewed to bugger, but the threads and tapers are fine,fitted to one bike from new,look quite tatty, but with a bit of spit and polish should clean up lovely which is what i had planned for them.
I also have some cyclone 345, or whatever came as original spec on a 97 hahanna, as the bike is virtually original, look to be in quite good condition, rings seem fine also, though have only given them a very quick look over, will send pics and let you make up your own mind
see below
look to be quite pretty cranks imo, though know nothing else about them
http://www.retrobike.co.uk/gallery2/mai ... emId=12395
whole drivetrain is available also if interetsted
charlieboy
I have some lx cranks from about 93/4 can check model number if interetsed, rings are chewed to bugger, but the threads and tapers are fine,fitted to one bike from new,look quite tatty, but with a bit of spit and polish should clean up lovely which is what i had planned for them.
I also have some cyclone 345, or whatever came as original spec on a 97 hahanna, as the bike is virtually original, look to be in quite good condition, rings seem fine also, though have only given them a very quick look over, will send pics and let you make up your own mind
see below
look to be quite pretty cranks imo, though know nothing else about them
http://www.retrobike.co.uk/gallery2/mai ... emId=12395
whole drivetrain is available also if interetsted
charlieboy
- Feedback
- View
Re: cranks
Do you have a stash of 94bcd rings Rob...?
Been after a 34t for a while if you have, although currently on a promise...
Will check on a couple of cranksets tonight, see if either is compact (see, not a total hijack... :roll:
), just in case Charlieboy doesn't sort you out, so to speak :shock:
robdem":mvvq3p5l said:
Do you have a stash of 94bcd rings Rob...?
Been after a 34t for a while if you have, although currently on a promise...
Will check on a couple of cranksets tonight, see if either is compact (see, not a total hijack... :roll:
), just in case Charlieboy doesn't sort you out, so to speak :shock:
- Feedback
- View
CD Cranks
Hi ya Robdem
the LX are M563, tapers nice and crisp and threads fine also.
Cyclone cranks are still in situ, but are CD, and look to be in good condition, few scratches to the clear plasticoat layer, but again bit of elbow grease should come up lovely, rings are also in relatively good condition, and will send them also if interested
Hi ya Robdem
the LX are M563, tapers nice and crisp and threads fine also.
Cyclone cranks are still in situ, but are CD, and look to be in good condition, few scratches to the clear plasticoat layer, but again bit of elbow grease should come up lovely, rings are also in relatively good condition, and will send them also if interested
