RACE FACE - NOS 3 x non compact rings 24/34/36 £60

ALL SOLD

NOS Chainrings 9sp but will be fine with 7/8/9sp 24/34/46 £60


110/74 BCD (non compact) 170mm Red Race Face Turbines, Tapers and threads fine.
Of interest the arms have matching serial numbers which apparantly is quite unusual. Clearly the PACE middle ring is dead for all intents and purposes, the outer is quite worn but usable, granny is fine.













RACE FACE Bottom Bracket removed from my Xizang.

English Bottom Bracket threads (normal) for 68/73mm wide shells, 100mm steel BB spindle, new bearings (6903RS), new O-rings + spares.

You will need a PARK BBT-7 (for M950 lock ring) or equivalent to tighten the lock rings. I bought one especially to remove the BB & conveniently I need to keep mine for my M950 BB. Needle nose pliers work fine for the cups (gold ring non drive side)

http://www.chainreactioncycles.com/Mode ... elID=13228






6-4 Titanium crank bolts just 20g


Fitted:




Bearing in mind the chainrings cost me £60 last year, new bearings and seals, Ti Bolts & postage, I think £150 delivered within the UK, recorded and insured.

Interested in the Raceface rings if you split

Tc

will split, if buyers for all. Rings £60, cranks £45, BB £25 (it is rebuilt), ti bolts £10. Obviously splitting will cost more in postage, am open to offers on the set as a whole.

Goign on ebay tommorrow night, sensible offers considered before the double headed ebay/paypal monster gets a 20% cut.

PM'd

PM'd re crank bolts

Tc":29cmhbc6 said:

Interested in the Raceface rings if you split

Tc

Click to expand...

May be splitting now based on interest of everything bar the rings

In order of dibs for the rings

1. Tc.
2. Neillesie.
3. Benbonty

Tc you have PM.

gtRTSdh":3ri8st7z said:

Tc":3ri8st7z said:

Interested in the Raceface rings if you split

Tc

Click to expand...

May be splitting now based on interest of everything bar the rings

In order of dibs for the rings

1. Tc - backed out.
2. Neillesie.
3. Benbonty

Tc you have PM.

Click to expand...

Neillesie you have PM

you sure the RF BB is 100mm axle length? min spec required for turbine cranks are 107mm.

RockiMtn":2opcc4q0 said:

you sure the RF BB is 100mm axle length? min spec required for turbine cranks are 107mm.

Click to expand...

I know very little about cursed taper BB lengths but that's what it measures end to end, and this gives plenty of clearance on the chain stays which are 127mm / 5" wide where the pedal axel passes, the chainline was also correct with 73mm shell & 31.8mm down tube. retrobike was playing up last night, I've not heard from anyone after about 6pm.