first manitou three fork is complete including elastomers and bumpers though i would say you should replace them all. it is in very good to excellent condition overall. arch brace is non-standard with nice CNC cut-outs and removable brake cable stop hanger. any one got more details on it, info would greatly be appreciated. included steerer is 1-1/8" that's 188mm long with 53mm of threads. As seen there's an XT crown race that i've tried to remove but realized part way up that the it's stuck on the shim and I'd have to tap the darn thing off through the entire length of the steerer, so left it as is. $80 - SOLD!
comp fork requires elastomer and bumpers, but all 10 spacers are accounted for and the short boot covers. however, one upper bushing is absent, and both retaining rings and brake posts. otherwise everything else is there. you could take missing pieces from the second three fork above if you want to make this complete. however there is one heavy score straight from top to bottom, and a few lighter ones on one of the inner legs, otherwise the inner legs are in good condition. outer legs are excellent, as is the 1-1/8" crown/steerer which is threadless with a length of 180mm and has a star nut fitted. $25 - SOLD!
comp fork requires elastomer and bumpers, but all 10 spacers are accounted for and the short boot covers. however, one upper bushing is absent, and both retaining rings and brake posts. otherwise everything else is there. you could take missing pieces from the second three fork above if you want to make this complete. however there is one heavy score straight from top to bottom, and a few lighter ones on one of the inner legs, otherwise the inner legs are in good condition. outer legs are excellent, as is the 1-1/8" crown/steerer which is threadless with a length of 180mm and has a star nut fitted. $25 - SOLD!
