Hi
Right, bit of a clearout to raise funds, all prices are UK Posted (contact me for EU prices) payment via PP Gift or add the extra, thanks.
- Kalloy bar & stem combo from '96 - Alloy, satin finish 22.2mm, 130mm x 580mm, drop bolt
£15 UK Posted
- Tioga T-Bone Stem - Chrome Prestige steel 135mm long, 22.2mm with integrated cable guide, really nice
£22 UK Posted
- NOS Exage Alpine FD-M450 front mech - 34.9mm (1 & 1/2") flexy band type to allow for ovalish tubes!
£10 UK Posted
SOLD:
- Pauls Stoplights - good condition, early version with standard springs (they are new ones though), new SRP 6/4 Ti mounting bolts, new Ti pinch bolts, new rubber seals, no Moon units but some silver Avid tri-align hangers and black Tektro ones.
£130 UK Posted **SOLD**
- NOS XT M095 STI units - 3 x 7 speed, new/unused although the rubber hoods I took off the used pair just to make this one complete
£65 UK Posted **SOLD**
- XT Seatpost - 26.6mm diameter 330mm long, there is quite a bit of rubbing to the lower part but the top is good
£18 UK Posted **SOLD**
- XT M095 STI units - 3 x 7 speed, a few marks on these but good working condition
£45 UK Posted **SOLD PP**
- NOS XTR BB-M952 - 68 x 112.5, boxed & unused, unfortunately no spacers
£65 UK Posted **SOLD**
- NOS XTR CS-M900 - 12-28 new & unused
£80 UK Posted **SOLD**
- Campagnolo 1" headset - requires loose ball bearings, the races are a bit pitted but maybe useful to someone
£8 UK Posted **SOLD**
- XT M730 wheelset - XT M730 black hubs 135 rear, Mavic 231 rims 32h, wheelsmith d/b spokes - I regreased the hubs with new balls, the rim surfaces are good unfortunately there is a flat spot on the front wheel, it is inbetween the spoke holes so really it need replacing unless you run tyres at a low pressure so you dont notice! Slight gauging to a couple of spokes on the rear looks like where the chain has fallen down the 'gap' behind the cassette (see photo). Please note the logo has rubbed off the rear hub.
£42 UK Posted m**SOLD**
-X-Lite Xpert heat treated alloy flat bar, uncut at 600mm - the exposed areas are rather faded
£ 15 UK Posted **SOLD**
- XTR M900 rear mech - a few scrapes on this, will be ok for a rider, the jockey wheel pivot bolts are XT ones (slightly longer than they need to be)
£20 UK Posted **SOLD**
Thanks
Matt
Right, bit of a clearout to raise funds, all prices are UK Posted (contact me for EU prices) payment via PP Gift or add the extra, thanks.
- Kalloy bar & stem combo from '96 - Alloy, satin finish 22.2mm, 130mm x 580mm, drop bolt
£15 UK Posted
- Tioga T-Bone Stem - Chrome Prestige steel 135mm long, 22.2mm with integrated cable guide, really nice
£22 UK Posted
- NOS Exage Alpine FD-M450 front mech - 34.9mm (1 & 1/2") flexy band type to allow for ovalish tubes!
£10 UK Posted
SOLD:
- Pauls Stoplights - good condition, early version with standard springs (they are new ones though), new SRP 6/4 Ti mounting bolts, new Ti pinch bolts, new rubber seals, no Moon units but some silver Avid tri-align hangers and black Tektro ones.
£130 UK Posted **SOLD**
- NOS XT M095 STI units - 3 x 7 speed, new/unused although the rubber hoods I took off the used pair just to make this one complete
£65 UK Posted **SOLD**
- XT Seatpost - 26.6mm diameter 330mm long, there is quite a bit of rubbing to the lower part but the top is good
£18 UK Posted **SOLD**
- XT M095 STI units - 3 x 7 speed, a few marks on these but good working condition
£45 UK Posted **SOLD PP**
- NOS XTR BB-M952 - 68 x 112.5, boxed & unused, unfortunately no spacers
£65 UK Posted **SOLD**
- NOS XTR CS-M900 - 12-28 new & unused
£80 UK Posted **SOLD**
- Campagnolo 1" headset - requires loose ball bearings, the races are a bit pitted but maybe useful to someone
£8 UK Posted **SOLD**
- XT M730 wheelset - XT M730 black hubs 135 rear, Mavic 231 rims 32h, wheelsmith d/b spokes - I regreased the hubs with new balls, the rim surfaces are good unfortunately there is a flat spot on the front wheel, it is inbetween the spoke holes so really it need replacing unless you run tyres at a low pressure so you dont notice! Slight gauging to a couple of spokes on the rear looks like where the chain has fallen down the 'gap' behind the cassette (see photo). Please note the logo has rubbed off the rear hub.
£42 UK Posted m**SOLD**
-X-Lite Xpert heat treated alloy flat bar, uncut at 600mm - the exposed areas are rather faded
£ 15 UK Posted **SOLD**
- XTR M900 rear mech - a few scrapes on this, will be ok for a rider, the jockey wheel pivot bolts are XT ones (slightly longer than they need to be)
£20 UK Posted **SOLD**
Thanks
Matt
