A bit of a parts Clear out, if its not unused its in very good order.
Paypal gift only, Postage at cost anywhere in the world.
No dibs, no bids thanks.
Specialized GROUND CONTROL tyres....., Lovely Condition BUT not NOS, been residing on my Yeti for a long time, the last pair sold on ebay for £240 (totally ridiculous price). Hard to find for that period correct Build, but a great tyre too.
£110 + post...... (very carefully packaged, and able to send worldwide)
Yeti/Wtb Saddle, very good condition, (slight indent in the foam from storage but will disappear when used and it is the comfort Zone WTB)
Paid £100 for it, very hard to find saddle. £90.00 + post.
Cooks Cranks, In lovely condition tapers and threads excellent, from memory 110x175. And near NOS.
£150.00 + Post.-----------SOLD-----------------
Grafton Cranks Silver, Again in lovely Condition, Tapers and threads excellent, slight heel mark to polish out, but again stunning cranks.
£150. + post ------------NOW AVALIABLE_____________
Chris King No Thread set in black, with correct top cap, 1" ahead. lovely bearings obviously, seal present, has been fitted but no marks other than from fitting an certainly not visible when in frame.
£50.00 +postage
Pauls Components Brake Levers (Cantilever) NOS still bagged.
Not cheap, but they are new, and saves on custom charges buying from the states.
£60.00+postage
Pauls Components Brake Levers (V-Brake) Black and silver, lovely condition But not NOS.
£45.00 + postage.---------------(sold)---------------------
ControlTech seatpost. NOS, in 28.6, never fitted to frame, a slight pin sized scratch at the bottom from storage and a scuff at the top under where the saddle would sit. , but so small you cant even picture it.
£35.00 + post
Controltech seatpost NOS, in silver all decals present and marked Easton. 27.00
£45.00 + post.
Syncros Seatpost in silver NOS unmarked and stored for years. 27.2
£50.00 + post.---------------SOLD-----------------------
Controltech Handlebar Stem, 1"1/8th Black and unmarked, lovely finish, 135mm length 0 rise.
£25.00 +post.
Syncros Aheadstem, silver/blue, 1" 130mm length, 0 rise, NOS 2 small rub marks from storage, all decal present.
£30.00 +post.
Pace Rc 36 ProClass.
RC36 Pro Class
Titanium Nitride (TiNi) coated stanchions, carbon brace, magnesium canti studs. Eibach Coil springs - Yellow (soft), Red (Medium), Blue (Hard). 90mm travel (can be reduced to 70mm by removing 20mm secondary spring. Damping cartridge - oil weight can be changed to suit rider weight (Forks came as standard with medium springs and 5.0 weight oil)
Very Good Condition showing little signs of wear, full ahead steerer in 1"1/8 can obviously be swopped out for all manner of sizes.
£100. +post.-------------SOLD-------------------------
Mavic SUP/CD---/ SYNCROS/RINGLE hubset, laced with Brand new stainless spokes with Anodized Alloy blue nipples, Lovely condition and Just built and tensioned and have remained unused since. Ready to race, and to be fair I consider these cheap, if you went to a pro Wheel builder they wouldn't charge you much less to supply the spokes/nipples and to build them.
£150.+post.----------------------SOLD-------------------------
Paypal gift only, Postage at cost anywhere in the world.
No dibs, no bids thanks.
Specialized GROUND CONTROL tyres....., Lovely Condition BUT not NOS, been residing on my Yeti for a long time, the last pair sold on ebay for £240 (totally ridiculous price). Hard to find for that period correct Build, but a great tyre too.
£110 + post...... (very carefully packaged, and able to send worldwide)
Yeti/Wtb Saddle, very good condition, (slight indent in the foam from storage but will disappear when used and it is the comfort Zone WTB)
Paid £100 for it, very hard to find saddle. £90.00 + post.
Cooks Cranks, In lovely condition tapers and threads excellent, from memory 110x175. And near NOS.
£150.00 + Post.-----------SOLD-----------------
Grafton Cranks Silver, Again in lovely Condition, Tapers and threads excellent, slight heel mark to polish out, but again stunning cranks.
£150. + post ------------NOW AVALIABLE_____________
Chris King No Thread set in black, with correct top cap, 1" ahead. lovely bearings obviously, seal present, has been fitted but no marks other than from fitting an certainly not visible when in frame.
£50.00 +postage
Pauls Components Brake Levers (Cantilever) NOS still bagged.
Not cheap, but they are new, and saves on custom charges buying from the states.
£60.00+postage
Pauls Components Brake Levers (V-Brake) Black and silver, lovely condition But not NOS.
£45.00 + postage.---------------(sold)---------------------
ControlTech seatpost. NOS, in 28.6, never fitted to frame, a slight pin sized scratch at the bottom from storage and a scuff at the top under where the saddle would sit. , but so small you cant even picture it.
£35.00 + post
Controltech seatpost NOS, in silver all decals present and marked Easton. 27.00
£45.00 + post.
Syncros Seatpost in silver NOS unmarked and stored for years. 27.2
£50.00 + post.---------------SOLD-----------------------
Controltech Handlebar Stem, 1"1/8th Black and unmarked, lovely finish, 135mm length 0 rise.
£25.00 +post.
Syncros Aheadstem, silver/blue, 1" 130mm length, 0 rise, NOS 2 small rub marks from storage, all decal present.
£30.00 +post.
Pace Rc 36 ProClass.
RC36 Pro Class
Titanium Nitride (TiNi) coated stanchions, carbon brace, magnesium canti studs. Eibach Coil springs - Yellow (soft), Red (Medium), Blue (Hard). 90mm travel (can be reduced to 70mm by removing 20mm secondary spring. Damping cartridge - oil weight can be changed to suit rider weight (Forks came as standard with medium springs and 5.0 weight oil)
Very Good Condition showing little signs of wear, full ahead steerer in 1"1/8 can obviously be swopped out for all manner of sizes.
£100. +post.-------------SOLD-------------------------
Mavic SUP/CD---/ SYNCROS/RINGLE hubset, laced with Brand new stainless spokes with Anodized Alloy blue nipples, Lovely condition and Just built and tensioned and have remained unused since. Ready to race, and to be fair I consider these cheap, if you went to a pro Wheel builder they wouldn't charge you much less to supply the spokes/nipples and to build them.
£150.+post.----------------------SOLD-------------------------
