Wanted WTD: Plastic spoke guard for 7 Spd Cassette

[Tricky1977]

As title, I need a plastic guard for a standard 94 7 speed cassette and hub (28t maybe?). My chain keeps popping off and getting stuck.
Thanks

 

[Racin'snake]

As title, I need a plastic guard for a standard 94 7 speed cassette and hub (28t maybe?). My chain keeps popping off and getting stuck.
Thanks

You need to adjust one of the 2 stop screws on the deraileur

 

[dandy1]

As @Racin'snake said, adjust one of the limit screws on the rear derailleur so derailleur just pops up on to the biggest cog. Should stop it from over shifting

 

[nstarmore]

Yup, you need a screw driver not a dork disc

 

[tractordrafter]

The stop screws will be labelled L and H normally.. L is for low ratio stop adjustment, tighten this one until you feel resistance as it wants to go into the biggest sprocket, then back it off 1/4 turn or so and you should be ok

 

[Racin'snake]

The stop screws will be labelled L and H normally.. L is for low ratio stop adjustment, tighten this one until you feel resistance as it wants to go into the biggest sprocket, then back it off 1/4 turn or so and you should be ok

Yeah that's what my reply should have said

 

[Tricky1977]

You need to adjust one of the 2 stop screws on the deraileur

You’re probably right
But as usual I opt to buying more stuff!

 

[Tricky1977]

I should add that I have thumbies and while they are “indexed” at the extremes they are so stiff that I regularly over shift

 

[tractordrafter]

I should add that I have thumbies and while they are “indexed” at the extremes they are so stiff that I regularly over shift

I have thumbies too, two thumbies and eight fingies