cyclotoine
Senior Retro Guru
- Feedback
- View
All prices in USD OR BEST OFFER. plus shipping, see below
Suntour 7 speed hub set with cassette, it's got wear but rides find with new chain. The freehub has a bit of play but both hubs are rebuilt. I think a 10s shimano cassette washer between the freehub and the shell might eliminate the play but never got around to trying. Freehub also rebuilt with new bearings! $25
Brodie, silver machined alloy head stem 1-1/8" 130mm $15
Specialized 170g 585mm flat bars, black $15
Shimano 952 rear derailleur $35
140mm 5D Syncros Cattlehead black, used, some old tape need to be cleaned off and could use a decal kit. $35
Syncros Cattleprod, 150mm 0Deg 1-1/8" NOS in bag $20
Syncros Cattleprod, 140mm 0Deg. Black 1-1/8" NOS $40
Control Tech 135mm some positive rise not sure what angle, NOS 1-1/8" $40
Shimano STX headset - mounted and removed, never used, 1-1/8" threaded $25
Dia Compe PC8 versa brake levers $15 (for V I believe).
Blackspire 27.2 $20
Syncros 27.4mm NOS $50
Rock Shocks mag Crown, 1-1/8" threaded 160mm some marks on back $7?
Clockwise from top left: Vuelta, 48t/94bcd NOS $10, Blackspire 48t/94bcd NOS $12, Suntour MD 42t/94bcd $8 SOLD, Vuelta 34t/94bcd $5.
Shipping
All items shipped Via Canada Post Small packet.
up to 250 g is $9 EU/UK, $6.50 USA (few items will fit this, maybe a pair of cantilevers)
250-500g $16.50air, $9.50 surface EU/UK, $10 USA, most items will fall into this category in a bubble wrap
500g-1kg $31 air, $16 surface EU/UK, $14 USA air. I recommend surface for the savings but be prepared to wait!
SOLD
Suntour 7 speed shifters $20
Suntour XC LTD 28.6mm Bottom pull FD good condition $12
Shimano XT RD-M730 Dismantled, cleaned and reassembled. I realize the barrel adjuster is not original spec. I have touched up the black since the photo $20
RaceFace XY 26.8mm $30, setback
Syncros first gen stem. 1/8" with noodle, 120mm, decent shape too. appears to be slight negative rise (probably 5 degrees so should still have slight rise when mounted. $85
Onza bar ends, black cro-mo, rubber intact, end caps missing, need a respray. $8
Black RIngle Front Skewer, steel not titanium. one original spring scraped up some. I know people like to restore these. $15
Shimano XT RD-M735 SGS decent shape, rebuilt, but non-original barrel adjuster $30
Shimano XT FD-M736 28.6mm top pull $20 some marks cosmetically but cage is in great shape, very little use
Bontrager/Titec Titanium handlebars about 540 mm with minor crimping at ends. Asking $40
140mm 15D Syncros Cattlehead black NOS with plastic reprod. top cap. $40 note narrower clamp for risers
Shimano XTR FD-M953 31.8mm bottom pull NOS, but some shop wear $45
b]Ritchey Pedals[/b], Road SPD style, I believe the axles are TI, they don't like deeply recessed cleats. $35, barely used. Were NOS and used once or twice. $35 SOLD
Shimano XT FD-M735 28.6mm bottom pull $25
RaceFace System Stem, 110mm 1-1/8" threadless, black $20 SOLD
Deore MT-60, silver, pair, one of the plasitc back pieces has pieces of inner flange broken off (can't see it when on). missing one mounting bolt though maybe I'll find it. $10 (Top) $20 for the pair SOLD
Deore MT-62, silver, pair $12 (bottom) $20 for the pair SOLD
Deore XT BR-M734, silver, pair $15. pads have silver spray paint on them. condition is fair. Not longer avail.
Vanguard Lizards, Red, full set NOS. $40 SOLD
Curve (Kona), silver full set. note marked up red pieces, missing one piece of hardware, only 2 mountain bolts here. $30 SOLD
M733 levers, cosmetically poor $7 SOLD
XTR M900 28.6 bottom pull NOS $60 SOLD
Syncros Cattleprod, silver, 120mm, 1-1/8" $35 SOLD
Syncros Cattleprod, 140mm 0 degrees 1-1/8" NOS and in much cleaner shape than above. $15 SOLD
FOR TRADE ONLY for 130mm cattle prod with noodle, ideally the kind with flat top (or if you find someone willing to sell same I will sell this for same price)
Syncros Cattleprod, 110mm, 1-1/8" with noodle, black
TRADE MADE
XTR M-953 31.8 bottom pull FD, unfortunately has a bunch of shop wear but is unused, $45 SOLD
Syncros Cattleprod, 150mm 0 degrees 1-1/8" $10 SOLD
Dura-ace 7400 28.6 FD $20 SOLD
Clockwise from top left: Real Rings 110BCD 46t/36t with a short of pealing finish $8 SOLD, Vuelta 46T 110 BCD, bent and some tried to correct, could service FREE with something else, Biopace Alloy 38/48 $10. SOLD
Set of black steel biopace rings $5 like new SOLD
Suntour 7 speed hub set with cassette, it's got wear but rides find with new chain. The freehub has a bit of play but both hubs are rebuilt. I think a 10s shimano cassette washer between the freehub and the shell might eliminate the play but never got around to trying. Freehub also rebuilt with new bearings! $25
Brodie, silver machined alloy head stem 1-1/8" 130mm $15
Specialized 170g 585mm flat bars, black $15
Shimano 952 rear derailleur $35
140mm 5D Syncros Cattlehead black, used, some old tape need to be cleaned off and could use a decal kit. $35
Syncros Cattleprod, 150mm 0Deg 1-1/8" NOS in bag $20
Syncros Cattleprod, 140mm 0Deg. Black 1-1/8" NOS $40
Control Tech 135mm some positive rise not sure what angle, NOS 1-1/8" $40
Shimano STX headset - mounted and removed, never used, 1-1/8" threaded $25
Dia Compe PC8 versa brake levers $15 (for V I believe).
Blackspire 27.2 $20
Syncros 27.4mm NOS $50
Rock Shocks mag Crown, 1-1/8" threaded 160mm some marks on back $7?
Clockwise from top left: Vuelta, 48t/94bcd NOS $10, Blackspire 48t/94bcd NOS $12, Suntour MD 42t/94bcd $8 SOLD, Vuelta 34t/94bcd $5.
Shipping
All items shipped Via Canada Post Small packet.
up to 250 g is $9 EU/UK, $6.50 USA (few items will fit this, maybe a pair of cantilevers)
250-500g $16.50air, $9.50 surface EU/UK, $10 USA, most items will fall into this category in a bubble wrap
500g-1kg $31 air, $16 surface EU/UK, $14 USA air. I recommend surface for the savings but be prepared to wait!
SOLD
Suntour 7 speed shifters $20
Suntour XC LTD 28.6mm Bottom pull FD good condition $12
Shimano XT RD-M730 Dismantled, cleaned and reassembled. I realize the barrel adjuster is not original spec. I have touched up the black since the photo $20
RaceFace XY 26.8mm $30, setback
Syncros first gen stem. 1/8" with noodle, 120mm, decent shape too. appears to be slight negative rise (probably 5 degrees so should still have slight rise when mounted. $85
Onza bar ends, black cro-mo, rubber intact, end caps missing, need a respray. $8
Black RIngle Front Skewer, steel not titanium. one original spring scraped up some. I know people like to restore these. $15
Shimano XT RD-M735 SGS decent shape, rebuilt, but non-original barrel adjuster $30
Shimano XT FD-M736 28.6mm top pull $20 some marks cosmetically but cage is in great shape, very little use
Bontrager/Titec Titanium handlebars about 540 mm with minor crimping at ends. Asking $40
140mm 15D Syncros Cattlehead black NOS with plastic reprod. top cap. $40 note narrower clamp for risers
Shimano XTR FD-M953 31.8mm bottom pull NOS, but some shop wear $45
b]Ritchey Pedals[/b], Road SPD style, I believe the axles are TI, they don't like deeply recessed cleats. $35, barely used. Were NOS and used once or twice. $35 SOLD
Shimano XT FD-M735 28.6mm bottom pull $25
RaceFace System Stem, 110mm 1-1/8" threadless, black $20 SOLD
Deore MT-60, silver, pair, one of the plasitc back pieces has pieces of inner flange broken off (can't see it when on). missing one mounting bolt though maybe I'll find it. $10 (Top) $20 for the pair SOLD
Deore MT-62, silver, pair $12 (bottom) $20 for the pair SOLD
Deore XT BR-M734, silver, pair $15. pads have silver spray paint on them. condition is fair. Not longer avail.
Vanguard Lizards, Red, full set NOS. $40 SOLD
Curve (Kona), silver full set. note marked up red pieces, missing one piece of hardware, only 2 mountain bolts here. $30 SOLD
M733 levers, cosmetically poor $7 SOLD
XTR M900 28.6 bottom pull NOS $60 SOLD
Syncros Cattleprod, silver, 120mm, 1-1/8" $35 SOLD
Syncros Cattleprod, 140mm 0 degrees 1-1/8" NOS and in much cleaner shape than above. $15 SOLD
FOR TRADE ONLY for 130mm cattle prod with noodle, ideally the kind with flat top (or if you find someone willing to sell same I will sell this for same price)
Syncros Cattleprod, 110mm, 1-1/8" with noodle, black
TRADE MADE
XTR M-953 31.8 bottom pull FD, unfortunately has a bunch of shop wear but is unused, $45 SOLD
Syncros Cattleprod, 150mm 0 degrees 1-1/8" $10 SOLD
Dura-ace 7400 28.6 FD $20 SOLD
Clockwise from top left: Real Rings 110BCD 46t/36t with a short of pealing finish $8 SOLD, Vuelta 46T 110 BCD, bent and some tried to correct, could service FREE with something else, Biopace Alloy 38/48 $10. SOLD
Set of black steel biopace rings $5 like new SOLD
