Prices are posted in UK mainland only kids, expect fast delivery 
feel free to make offers or trades for anything in my wanted list (check my signature)
SUNTOUR FRONT HUB
32 hole
complete with original but rusty QR skewer
stamped JAPAN FI = 1989 I believe
quite smooth but would be nicer after regrease & polish
£10 posted
SHIMANO DEORE XT FRONT MECH
FD-M737 / 28.6mm / bottom pull
nice condition
£13 posted - SOLD on CTC forum
SHIMANO DURA-ACE REAR MECH
RD-7401 short cage, 6/7 speed SIS
lush mech in great condition apart from light scrape under 'D'
original D-A jockeys inc. alloy upper pulley
£17 posted -SOLD
SHIMANO 105 FRONT QR SKEWER
for the mid-late '90s anodized model of 105 hub
with creamy grey nut
£6 posted - SOLD
SHIMANO TRIPLE CRANKSET
short 160mm arms - ideal for cheap bike for er.. short person!
48/38/28 rings (granny ring most worn unusually)
lots of rub but threads & tapers good, c/w removable chainguard & screws
SOLD
£10 posted
SPECIALIZED AHEAD STEM
from '98 Hardrock IIRC
25.4mm clamp x 100mm reach x 30 degrees rise x 41mm stack
£8 posted SOLD
ACOR CHAIN TENSIONER
chainstay mount with sealed alloy jockey wheel
no little bits missing and in nice condition
£8 posted
a few steel bits I had powdercoated in black gloss recently - all mint:
- riser bars with brace, 620mm x 25.4mm x lots of sweep, 524grams
£10 posted SOLD
- expander bar ends, 19mm wedge OD, require end plugs, 299grams the pair
£8 posted SOLD
- basic bar ends, require end plugs, 260grams the pair
£7 posted
RISER BARS
Marin Ovation double butted XC 6061 alloy
620mm x 25.4mm x slight sweep
Marin logo wearing thin from attempt to remove :roll: 260grams
SOLD
£8 posted
bar ends, all with usual scuffs:
- Ritchey long polished silver 170grams - £9 posted - sold
- matt silver anodized 119grams - £6 posted
- matt black anodized 135grames - £6 posted -sold
stems:
- 1989 or 1990 SR Sakae black 1" quill with lots rise and canti brake cable guide, 443grams - £10 posted - SOLD
- bizarre polished alloy retro downhill stem 1 1/8" ahead steerer x 25.4mm twin clamp, 340grams - £10 posted SOLD
- short 1 1/8" steerer ahead in mint condition, 45mm reach x 25.4mm clamp x 20 degree rise x 50mm stack - £9 posted - sold
- another short 1 1/8" steerer ahead stem in near mint condition, 55mm reach x 25.4mm clamp x approx 45 degree rise x 50mm stack - £8 posted - sold
VINTAGE CHAINGUARD
with 3 point fixings not included
designed for 46 tooth single front chainring - as found on many old roadsters - this has just been sandblasted and put straight into packaging ready for powdercoating / respray, only selling as project has been put 'on hold'
basically NOS and ideal for vintage 3 speed restoration
£10 posted
feel free to make offers or trades for anything in my wanted list (check my signature)SUNTOUR FRONT HUB
32 hole
complete with original but rusty QR skewer
stamped JAPAN FI = 1989 I believe
quite smooth but would be nicer after regrease & polish
£10 posted
SHIMANO DEORE XT FRONT MECH
FD-M737 / 28.6mm / bottom pull
nice condition
£13 posted - SOLD on CTC forum
SHIMANO DURA-ACE REAR MECH
RD-7401 short cage, 6/7 speed SIS
lush mech in great condition apart from light scrape under 'D'
original D-A jockeys inc. alloy upper pulley
£17 posted -SOLD
SHIMANO 105 FRONT QR SKEWER
for the mid-late '90s anodized model of 105 hub
with creamy grey nut
£6 posted - SOLD
SHIMANO TRIPLE CRANKSET
short 160mm arms - ideal for cheap bike for er.. short person!
48/38/28 rings (granny ring most worn unusually)
lots of rub but threads & tapers good, c/w removable chainguard & screws
SOLD
£10 posted
SPECIALIZED AHEAD STEM
from '98 Hardrock IIRC
25.4mm clamp x 100mm reach x 30 degrees rise x 41mm stack
£8 posted SOLD
ACOR CHAIN TENSIONER
chainstay mount with sealed alloy jockey wheel
no little bits missing and in nice condition
£8 posted
a few steel bits I had powdercoated in black gloss recently - all mint:
- riser bars with brace, 620mm x 25.4mm x lots of sweep, 524grams
£10 posted SOLD
- expander bar ends, 19mm wedge OD, require end plugs, 299grams the pair
£8 posted SOLD
- basic bar ends, require end plugs, 260grams the pair
£7 posted
RISER BARS
Marin Ovation double butted XC 6061 alloy
620mm x 25.4mm x slight sweep
Marin logo wearing thin from attempt to remove :roll: 260grams
SOLD
£8 posted
bar ends, all with usual scuffs:
- Ritchey long polished silver 170grams - £9 posted - sold
- matt silver anodized 119grams - £6 posted
- matt black anodized 135grames - £6 posted -sold
stems:
- 1989 or 1990 SR Sakae black 1" quill with lots rise and canti brake cable guide, 443grams - £10 posted - SOLD
- bizarre polished alloy retro downhill stem 1 1/8" ahead steerer x 25.4mm twin clamp, 340grams - £10 posted SOLD
- short 1 1/8" steerer ahead in mint condition, 45mm reach x 25.4mm clamp x 20 degree rise x 50mm stack - £9 posted - sold
- another short 1 1/8" steerer ahead stem in near mint condition, 55mm reach x 25.4mm clamp x approx 45 degree rise x 50mm stack - £8 posted - sold
VINTAGE CHAINGUARD
with 3 point fixings not included
designed for 46 tooth single front chainring - as found on many old roadsters - this has just been sandblasted and put straight into packaging ready for powdercoating / respray, only selling as project has been put 'on hold'
basically NOS and ideal for vintage 3 speed restoration
£10 posted
