benslingsby_
Dirt Disciple
Hi all,
I’ve just bought new Shimano Altus trigger shifters for both front and rear derailleurs. I adjusted the rears just right but the fronts have been a pain. The front derailleur is a shimano alivio. I tried to follow the Park tool demonstration on youtube. I set the low screw followed by the high screw and then turned the barrel adjuster counter clockwise to stop the derailleur moving further over on the largest cog. After doing this however, the chain would not switch from the highest cog (3) down to cog 1. Any advice?
Thanks
I’ve just bought new Shimano Altus trigger shifters for both front and rear derailleurs. I adjusted the rears just right but the fronts have been a pain. The front derailleur is a shimano alivio. I tried to follow the Park tool demonstration on youtube. I set the low screw followed by the high screw and then turned the barrel adjuster counter clockwise to stop the derailleur moving further over on the largest cog. After doing this however, the chain would not switch from the highest cog (3) down to cog 1. Any advice?
Thanks