For Sale Shimano deore mt60 cranks and rings

Mickeyspinn

rBotM Winner
I've given these crank arms a degrease,spirit wash and then about 45 mins of autosol they've responded rather well 👍 with a little bit more they could make rather peachy cranks!
Both logos are bold and unmarked...if you zoom I've been gentle around them...a little more... easy as you go...perfect.
non drive side has very light abrasions. If you want to perfect them I'd start with nothing less than 1000 grade wet n dry and see how it responds.theres also a few tiny clonks near logo but I reckon they would go👍
Small clonkerations on pedal end of non drive side but v easy to lose! And one near crank bolt hole....again loseable . Close up on the sides there's very light corrosion marks but that is being picky!
Tapers are good,all threads are fine and pedal faces are as good as it gets!
IMG_20220618_142812_135.jpg

IMG_20220618_142843_276.jpg

IMG_20220618_142906_406.jpg

IMG_20220618_142833_856.jpg
Comes with correct spacers and one presentable chrome dust cap...t'other was a bugger 😂
All-in all presentable cranks or if you like wine and polishing you'll have some gooduns 👍
£40 posted!

Next up ....rings 46,36,24
Loads of life in these! Original bike had done very little other than fester in shed,one lady owner 😂
Anodizing has light corrosion .....shame... don't quote me ...a little bath in lemon juice might just help here.....I would of but local shop didn't have any lemons today

IMG_20220618_144022_513.jpg
£25 posted!

If you want both cranks and rings....£55 posted!
If I can find some tidy bolts I'll chuck em in👍
 

Latest posts

Back
Top