Wanted Rock Shox Mag 21 Steerer 1 1/8 Aheadset (sorted now).

[Gtaddict]

Hi there I am looking for the above please with at least 180 mm steerer length. Would consider a much longer threaded steerer if it can be cut down and leave me with the desired length. Many thanks

 

[FluffyChicken]

.. Would consider a much longer threaded steerer if it can be cut down and leave me with the desired length. Many thanks

Threaded cannot be used like that with these, the steerers are tapered to lose weight.

 

[Biker Flegreo]

Hi there I am looking for the above please with at least 180 mm steerer length. Would consider a much longer threaded steerer if it can be cut down and leave me with the desired length. Many thanks

Hi mate! I have one, i’ll send you some pics tomorrow

 

[BrushedAluminium]

got a couple here let me check

 

[Gtaddict]

Hi mate! I have one, i’ll send you some pics tomorrow

Great thank you

 

[Gtaddict]

got a couple here let me check

Great thank you

 

[jonnymcenroe]

Threaded cannot be used like that with these, the steerers are tapered to loose weight.

Uh oh...

 

[FluffyChicken]

Uh oh...

That should be lose not loose also, although things would be loose if used.

 

[jonnymcenroe]

That should be lose not loose also, although things would be loose if used.

Explains why I'm running an extra tight front end on my Hammer. Time to strip it and relocate the forks to a threaded setup.

 

[FluffyChicken]

Basically the threaded part is like normal. Just under it, where there is often a sticker*, you should see it butt inwards (externally).

The sticker says something like 'Reduced Diameter,.. Etc... "