Nuke Proof Carbon/Titanium Racer

CCMDoc

BoTM Winner
When James Bethea left our Team Brooklyn ATB for a factory ride with Nuke Proof I was both ecstatic for him and sad for our Team.

James hit the big time and was featured in ads and in interviews.

AC42CB2E-0524-4B6E-B5AC-E172CCCF055C_zpsx7cwwchw.jpg


Always wanted a Nuke Proof but until recently the Ti wondermachines eluded me.

Then Mr. Ship posted a rather odd and different bike frame - one seen only in the NP mini-catalogue and once in the ever so soft hands of a unicorn herd owner and regular contributor to this forum.

I reconnected with James after more than 20 years and landed the unique Carbon/Ti Nuke Proof from Richard who also helped me with a few other items.

Finding NP bars and bar ends was tough.
Getting the Ti Twisters was nigh on impossible.

Plenty of Carbon and Ti hubs around and I'll be swapping the carbon version on soon.

James provided an original Team Nuke Proof skinsuit and I dedicated the build to incorporating nearly every sponsor in honor of James and his leap from sponsored local racer to the big leagues.

Frame: NukeProof Carbon/Titanium

Fork: Rock Shox Judy FSX Carbon

Headset: Tioga Alchemy
Stem: ControlTech
Handlebar: NukeProof
Grips: GripShift
Barends: NukeProof

Brakes: Paul Stoplight
Brake Pads: Shimano XT
Brake Cables: Shimano
Cantilever cable hangers: Paul Moon Unit
Brake Levers: Gravity Research

Shifters: GripShift X-Ray
Front Derailleur: Shimano XTR
Rear Derailleur: Shimano XTR
Derailleur Cables: Shimano
Cassette: Shimano
Chain: SRAM PC 850
Cranks: Grafton SpeedStix
Crank Bolts:
Chainrings: Shimano M730
Chainring bolts: SRP Titanium
Bottom Bracket: White Bros Ti
Pedals: Onza HO Ti

Hub Skewers: NukeProof Ti Twisters
Rims: Mavic X517 SUP
Hubs: NukeProof Ti
Nipples: Aluminum
Spokes: 15 gauge
Tyres: Onza Aggro/Honch
Tubes: Bontrager

Saddle: Selle Italia Flite Ti
Seatpost: Tioga Carbo
Seatpost Binder: Interloc Racing Design

Decals: the one and only Gil

Weight: 22. 2 pounds

81F45A81-59A8-4A5B-995E-9E5B2B6380A1_zpsmqqe8c4z.jpg

26A8691D-29BF-4FB0-9502-8BDFDCBD2C10_zpsnmvz2pds.jpg

F1651A13-3C0B-406B-8A21-27A993E396C7_zpsn3qo9ped.jpg

3D5D4962-F964-4568-A2C1-A7B858D291E4_zpssltjvgat.jpg

A764A90F-1878-4161-BE5E-9E3DC11482CF_zpsi7coewfr.jpg

48FB9A33-1F7B-4A0A-9C0E-E185934CB670_zpsiobfeh0c.jpg

2CFE4BB1-B3C4-4F29-B257-B6AECB3830D2_zpsq0ngo2wm.jpg

6C8DFC3A-F744-4BE1-8DB5-062A4472AF92_zpsqotzmmf5.jpg
 
It is very cool, the whole build screams BOTM.

So did you ever find out if this was a frame produced or a prototype Study etc....?

Those decals look gooood.
 
Thanks for the kind comments.

Gil did a great job - as usual. I'll have to amend my build post to include and recognize him.

I've not been able to find out prototype vs. very limited production.
 
Re:

Well done Paul, looks great. It was a wrench to let this go but it went to a good home.
Pretty sure these were never production frames although maybe try to contact John Muenzenmeyer to find out for definite.
Just be careful if you decide to ride it!!!
 
Thank you Richard for giving me the opportunity to make this happen.
I was out riding thus missed your warning :D

James' description was spot on - it goes exactly where you point it.
No wandering, no frame windup no wobble.

Angles must be similar to my usual JT setup. Quick steering and easy to pick through rocks and roots.

The bike felt "familiar and I was immediately at home on trails I know so well that I know when the seat is off by a few millimeters. Speaking of which, I must not have tightened the seat enough since the nose tilted forward a bit after a little jump.

Everything else worked perfectly and I must say - I like these tires!

Overall - three thumbs up!

Now I want an all Ti Nuke Proof.


BEE26F10-7AAA-4A22-855A-DC88423278DC_zpsew1wtlgz.jpg

A0F33A99-9FBE-4ADF-BD00-DBCBC84C922E_zps0jnkk2rq.jpg
 
This bike was one of my unicorns long time ago, congrats for such a stunnig build; thumbs up for James Bethea too
 
Back
Top