Wanted M739 rear derailleur cable adjuster

TerryParadise

Retro Guru
Feedback
View
Hi all,

I've got a cable barrel adjuster on a Shimano RD-M739 that has a ferrule rusted stuck in there. Before I try drilling it out, does anyone have a spare unit, or know of any modern replacements that fit? See below for an extract from the Shimano parts sheet.

Thanks!
 

Attachments

  • Screen Shot 2022-02-04 at 15.45.10.png
    Screen Shot 2022-02-04 at 15.45.10.png
    82.2 KB · Views: 12
  • IMG_3563.JPG
    IMG_3563.JPG
    410.3 KB · Views: 12
They are all the same size (M6 IIRC). However, keep pickling yours with Plus-Gas (not WD40 or GT85) for a week and likely it will loosen after then dropping the mech into a pan of boiling water.
 
Push a flat head screwdriver into it which is just slightly smaller and twist. It will dig in and collapse it. Then pull out with pliers. I come across loads
 
Have you taken the adjuster off and tried pushing it out from behind?
 
Back
Top