Bought this a few years ago on here - apparently was raced by Richard Thackray at the Worlds a few years back.
It's a RC100 but a team model, with extra milling to the tubes.
Messed around with the build a bit over the last few years - but finally settled on a black and gold look (idea stolen from another Pace on here I know - but it looks good!)
It's just sat on the bike rack not being used so sadly it is time to go.
Looking for £1500 for complete bike or £750 for frame, forks, headset and rare Pace stem/steerer. Which based on recent sales seems about right.
Also comes complete with some Reynolds 531 rigid replacement legs for the Rc35 forks - very rare!
Would prefer collection from London to avoid damaging this classic bike but can discuss options with any buyer.
Full details of build and links to pics here: viewtopic.php?t=101076&highlight=
I will get some better pics taken and posted at the weekend, along with detailed sizings.
Frame: Pace RC100 Team Black (17 inch ctc/18 inch ctt/22 inch top tube)
Fork: Pace RC35
Headset: Mavic 1 inch
Stem: Pace combo steerer - 1 inch/130mm reach
Handlebar: Pace RC sub 130 Gold/23 inch wide
Grips: Onza Ules Black
Barends: None
Brakes: Magura HS33S Olympia Front and Rear
Brake Pads: Magura
Brake Cables: Magura
Cantilever cable hangers: N/A
Brake Levers: Magura
Shifters: Shimano XT thumbies
Front Derailleur: Shimano XT M737
Rear Derailleur: Shimano XTR M900
Derailleur Cables: Gore ride on
Cassette: Goldtec 12-28 8 speed Gold
Chain: Sram silver
Cranks: Bullseye
Crank Bolts: N/A
Chainrings: Pace
Chainring bolts: Nothing special
Bottom Bracket: Bullseye
Pedals: Shimano XT 737
Hub Skewers: Xlite
Rims: Mavic 117 Front/217 Rear SUP CD Ceramic 32 hole
Hubs: Pace front Goldtec Rear
Nipples: Silver alloy
Spokes: DT Swiss Plain Guage
Tyres: Panaracer Dart 2.1 HC front, Smoke 2.1 rear
Tubes: Nothing special
Saddle: Flite Ti
Seatpost: Gold USE
Seatpost Binder: Bolt
Weight: 25.5lbs (not bad with the Maguras and some heavy tyres )
It's a RC100 but a team model, with extra milling to the tubes.
Messed around with the build a bit over the last few years - but finally settled on a black and gold look (idea stolen from another Pace on here I know - but it looks good!)
It's just sat on the bike rack not being used so sadly it is time to go.
Looking for £1500 for complete bike or £750 for frame, forks, headset and rare Pace stem/steerer. Which based on recent sales seems about right.
Also comes complete with some Reynolds 531 rigid replacement legs for the Rc35 forks - very rare!
Would prefer collection from London to avoid damaging this classic bike but can discuss options with any buyer.
Full details of build and links to pics here: viewtopic.php?t=101076&highlight=
I will get some better pics taken and posted at the weekend, along with detailed sizings.
Frame: Pace RC100 Team Black (17 inch ctc/18 inch ctt/22 inch top tube)
Fork: Pace RC35
Headset: Mavic 1 inch
Stem: Pace combo steerer - 1 inch/130mm reach
Handlebar: Pace RC sub 130 Gold/23 inch wide
Grips: Onza Ules Black
Barends: None
Brakes: Magura HS33S Olympia Front and Rear
Brake Pads: Magura
Brake Cables: Magura
Cantilever cable hangers: N/A
Brake Levers: Magura
Shifters: Shimano XT thumbies
Front Derailleur: Shimano XT M737
Rear Derailleur: Shimano XTR M900
Derailleur Cables: Gore ride on
Cassette: Goldtec 12-28 8 speed Gold
Chain: Sram silver
Cranks: Bullseye
Crank Bolts: N/A
Chainrings: Pace
Chainring bolts: Nothing special
Bottom Bracket: Bullseye
Pedals: Shimano XT 737
Hub Skewers: Xlite
Rims: Mavic 117 Front/217 Rear SUP CD Ceramic 32 hole
Hubs: Pace front Goldtec Rear
Nipples: Silver alloy
Spokes: DT Swiss Plain Guage
Tyres: Panaracer Dart 2.1 HC front, Smoke 2.1 rear
Tubes: Nothing special
Saddle: Flite Ti
Seatpost: Gold USE
Seatpost Binder: Bolt
Weight: 25.5lbs (not bad with the Maguras and some heavy tyres )