Selling a 1998 Tazer FS frame with a raw finish, which could be left as is or be painted.
Here's the build thread: viewtopic.php?f=21&t=156468
A crack on the right seatstay has been repaired (see pic), but otherwise the main frame is sound without further cracks or dents. The back end is tight with no play in the bearings.
The linkage has two small cracks on the bridge (circled in red), which doesn't really effect performance, I think this was quite common for these frames. I'll also throw in a spare, but that's also cracked
The spring on the Vanilla R shock has a bit of surface rust, which was my choice of finish, but it could easily be cleaned and painted. The shock was working fine last time I used it.
Actual top tube (c-c): 485 mm
Horizontal top tube (c-c): approx 520 mm
Seat tube (c-t): 380 mm
£70 SOLD
Here's the build thread: viewtopic.php?f=21&t=156468
A crack on the right seatstay has been repaired (see pic), but otherwise the main frame is sound without further cracks or dents. The back end is tight with no play in the bearings.
The linkage has two small cracks on the bridge (circled in red), which doesn't really effect performance, I think this was quite common for these frames. I'll also throw in a spare, but that's also cracked
The spring on the Vanilla R shock has a bit of surface rust, which was my choice of finish, but it could easily be cleaned and painted. The shock was working fine last time I used it.
Actual top tube (c-c): 485 mm
Horizontal top tube (c-c): approx 520 mm
Seat tube (c-t): 380 mm
£70 SOLD