Rocky Mountain chain suck protector
- Thread starter FluffyChicken
- Start date
- Feedback
- View
im in need of one of them there things type bump, anyone got a spare
Charlie
Charlie
captaincosmic
Senior Retro Guru
- Feedback
- View
Sorry I am late to this thread SenorFluffmeister the chainsuck device on my 93 is not a plate but three concentric aluminium discs retained with three bolts very simple and easy to replicate.
- Feedback
- View
ah yes, captaincosmic. This thread was linked as info for charlieboy. I know you posted the 1993 setup, I guess I should add it here for info at some point.
I was either going to cut one out of ALU or seeing yours just use washers.
if anyone could trace the designs out with measurements... I've since forgotten and lost the PM's from anyone in this post.
I was either going to cut one out of ALU or seeing yours just use washers.
if anyone could trace the designs out with measurements... I've since forgotten and lost the PM's from anyone in this post.
captaincosmic
Senior Retro Guru
- Feedback
- View
- Feedback
- View
Re:
Just saying thanks yet again for that picture. Need to use it again
And all the other pictures too
Just saying thanks yet again for that picture. Need to use it again
And all the other pictures too
captaincosmic
Senior Retro Guru
- Feedback
- View
Re:
The three bolt versions were aluminium ovoid shaped washers about 5-8mm thick each individually mounted by a bolt and washer
The three bolt versions were aluminium ovoid shaped washers about 5-8mm thick each individually mounted by a bolt and washer
- Feedback
- View
Re:
Yes I have a set on one of my Altitudes (obtained after this post iirc).
But not my other and I was just checking how they mount on.
Yes I have a set on one of my Altitudes (obtained after this post iirc).
But not my other and I was just checking how they mount on.
