Rock Shox Question

wadsy · Apr 15, 2013

shogun":133cdef1 said:
The uppers are the same dia. and spacing, there's really not that much too it.

ok, so if I buy a set of Judy lower legs (with canti hanger) then any 28mm sid I will be able to make a hybrid from the two?...or do I need a specific year of sid?

Cheers

kikideparis · Apr 15, 2013

preferably a 63mm sid, because legs aren't same length...

wadsy · Apr 15, 2013

kikideparis":1ryyzvau said:
preferably a 63mm sid, because legs aren't same length...

ok, so what year would that be?

shogun · Apr 15, 2013

kikideparis":2mqugje8 said:
preferably a 63mm sid, because legs aren't same length...

Well I thought the only difference between a 63 and 80mm Sid was in the top out assembly? But its been about 10 years since I touched an early model Sid.

kikideparis · Apr 15, 2013

my 99 judy legs are shorter for almost 1 inch than the 99 sid legs...but works well...
so, for me any sid with 63mm travel are good for early judy xc or sl legs...will try on my 96 dh with 80mm, just to see ^_^

shogun · Apr 16, 2013

Ok...but thats no big deal as there is plenty of room in the lowers, its more of an issue if the legs are too short as they wouldn't get enough bushing overlap.

wadsy · Apr 28, 2013

Any more info chaps?...still seems a bit confusing to me :?

Rock Shox Question

wadsy

kikideparis

Retro Guru

wadsy

shogun

Senior Retro Guru

kikideparis

Retro Guru

shogun

Senior Retro Guru

wadsy

Similar threads

Latest posts