The one and only "HOW MUCH IS MY xyz WORTH" thread

Status
Not open for further replies.
MBR Magazine

Hi all,

Going through my attic i discovered my original print, first 13 issues of MBR magazine from back in 1997 or 1998 (issues 1 - 13, whenever the magazine came out first) and wondered if they would have any value to a retro collector?

they are all in mint condition too!

may stick them up on ebay or if anyone is interested or happy work something else out.

cheers,
 
HuMpH":1a6xjf5f said:
Sorry did not realise links are not allowed in first post so here is pic.
mf012.jpg

ooh thats nice - £100 on a good day via ebay, maybe more
 
HuMpH":llp00gbd said:
Sorry did not realise links are not allowed in first post so here is pic.
mf012.jpg
Are those 24" wheels? Small size limits value but great for a Muddy Fox lover's wife/son/daughter.
 
Re: MBR Magazine

calotherm":39equuxf said:
first 13 issues of MBR magazine from back in 1997 or 1998 (issues 1 - 13, whenever the magazine came out first)
Probably worth £25-30 as a lot. Still have a couple of these issues myself and they're a great reference for specs/prices. Was a good magazine back then... Now they don't seem to test anything below £2,000 :LOL:
 
lrh":105x8zkq said:
Are those 24" wheels? Small size limits value but great for a Muddy Fox lover's wife/son/daughter.

Yea 24" wheels..wish it was a bit bigger :D It is a real nice bike.


legrandefromage":105x8zkq said:
ooh thats nice - £100 on a good day via ebay, maybe more.

Thanks. I was hoping it would make £150 ;) Could use ebay as last resort, would rather try forums tbh..less chance of it suffering :LOL:
 
UK High-End stuff

I would like to sell some leftover stuff that was made in Britain, but I don't know what it might be worth to the right collector. I thought RBUK is the right place for this. All stuff is NOS except otherwise noted:
1. Middleburn cranks 170mm: 2 sets l+r and two spare left arms,
matching spider: 130bcd black + red, 110bcd red + 2x silver, 94bcd silver
P1030091.jpg


2. Middleburn (or Zero Components?) bottom bracket, labelled Shogun(stickers can be peeled of), BSA thread, mostly 119mm (can look for other lengths), extra mounting rings in different colours, also Middleburn cable oilers in different colours

P1030095.jpg


3. Middleburn hubset 32 hole silver with all the extras

P1030113.jpg


4. Shocktech UK fork labelled Shogun (again, decals can be removed) NIB, might have some different steerers for this

P1030098.jpg
P1030100.jpg


5. Shocktech UK used fork and many other spare parts for this, see picture
P1030101.jpg


6. and finally, a ultra-rare Shocktech Carbon fork (used) with carbon inner tubes(!!), freshly overhauled with a new Shocktech HardRide elastomer kit, works great, 1" steerer, ultralight, missing the top caps but works fine without
P1030105.jpg
P1030108.jpg

P1030110.jpg
P1030111.jpg
 
hi all.

I bought a 96/97 orange p7 frame and parts cheap, had been in owners garage for a good few years. Came with Manitou Mach 5 forks which are stiff and have no play at all, i am building the bike up high spec and have now purchased some pace rc 36's. I believe the mach 5's wont need much doing to them but dont have spare cash to get them working again.

Any ideas on what i shoukld advertise them for?

thanks

Andy
 
howdo folks,

are these worth owt?
cosmetically they are pretty much immaculate no scratches or anything but the elastomers are shot and need replacing

cheers in advance

IMAG0236.jpg

IMAG0238.jpg

IMAG0237.jpg
 
Status
Not open for further replies.

Latest posts

Back
Top