Scott Voltage YZ3 2005 is it worth getting repaired?
- Thread starter swos
- Start date
ok from what i can see, the jockey wheels on the rear mech are shot as is the large chain ring at the front. can't tell if the middle is ok or not, i'm guessing not.
half of the cassette looks to be ok but not much good having half a cassette.
so you already have cassette and chain links.
here is an ok crank set :- http://www.chainreactioncycles.com/Mode ... elID=65426
as for jockey wheels it is almost as cheap to buy a new rear mech :- http://www.chainreactioncycles.com/Mode ... elID=30990
or just some jockeys although not 100% on compatibility :- http://www.ebay.co.uk/itm/10-Tooth-Bicy ... 3ef338c9dc
i'm sure there is someone about who could help with tools and expertise.
half of the cassette looks to be ok but not much good having half a cassette.
so you already have cassette and chain links.
here is an ok crank set :- http://www.chainreactioncycles.com/Mode ... elID=65426
as for jockey wheels it is almost as cheap to buy a new rear mech :- http://www.chainreactioncycles.com/Mode ... elID=30990
or just some jockeys although not 100% on compatibility :- http://www.ebay.co.uk/itm/10-Tooth-Bicy ... 3ef338c9dc
i'm sure there is someone about who could help with tools and expertise.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The chain was only able to go onto the top cog on the front peddle. I've been told the front mech was knackered and really loose. It's dark outside now so will have to take a couple of further pictures tomorrow as I don't have a light in my shed.Khane":2k1hnvp5 said:i'd be quite supprised if it did, front mech are quite robust in there simplicity.
unwrap the chain give the front mech a bit of a wipe down and take another couple of pics of it.
