Merlin Newsboy #75 with home made fork

Re:

Thank you, it is necessary to be precise so that the fork is reliable and symmetrical.
Following the manufacture, cutting session...
 

Attachments

  • 9E7EEB4E-CA24-4906-B817-E051CFC06DC8.jpeg
    9E7EEB4E-CA24-4906-B817-E051CFC06DC8.jpeg
    69.1 KB · Views: 636
  • 3A335DAB-D39D-4532-89BA-0451497B372C.jpeg
    3A335DAB-D39D-4532-89BA-0451497B372C.jpeg
    70.1 KB · Views: 636
  • 0DC475BB-BD7C-4679-8981-9A204E1DA525.jpeg
    0DC475BB-BD7C-4679-8981-9A204E1DA525.jpeg
    76 KB · Views: 636
  • 7A319EA0-BC65-4EE2-8BA5-87D2A816DEEC.jpeg
    7A319EA0-BC65-4EE2-8BA5-87D2A816DEEC.jpeg
    41.9 KB · Views: 637
Re:

It remains to check the adjustments, strip the bond areas and bonded on a jig.
 

Attachments

  • 3B19656F-7E8F-4575-9A91-50872AD33226.jpeg
    3B19656F-7E8F-4575-9A91-50872AD33226.jpeg
    74.5 KB · Views: 596
  • F26EF18B-06CB-4BBC-A2BE-A6D4BE014EAA.jpeg
    F26EF18B-06CB-4BBC-A2BE-A6D4BE014EAA.jpeg
    75 KB · Views: 596
  • 554FE24B-698A-4B2F-83B7-25AF4F505CE6.jpeg
    554FE24B-698A-4B2F-83B7-25AF4F505CE6.jpeg
    73.1 KB · Views: 596
  • B0CB3886-7316-41DC-BC1B-2FB1C3D90D73.jpeg
    B0CB3886-7316-41DC-BC1B-2FB1C3D90D73.jpeg
    61.3 KB · Views: 596
Re:

Finished, rest to put in place ...
 

Attachments

  • 28C2F870-7155-417F-874F-AD322757BA0B.jpeg
    28C2F870-7155-417F-874F-AD322757BA0B.jpeg
    57.1 KB · Views: 574
Re:

Brave operation with the fork bonding! I guess it was a lucky coincidence that the Ti legs fitted over the steel crown? Did you have to alter the diameters of the different tubes in any way?
 
Re: Merlin Newsboy #75

mojo ti":1yp1boh5 said:
Thanks, I have made this fork with a Kona P2 and Litespeed first generation lower :roll:

I hope you will not mind... :oops:

Are you taking orders? Got the same broken titanium fork and a P2 is easy to come by...

Cheers
IHR
 
Re:

Great bike and effort. May i ask why you didn't build the homemade fork with RC mounts so you can RC brakes on both sides?

Best regards

Moritz
 
Re: Re:

mauricer":1szwlxrv said:
Great bike and effort. May i ask why you didn't build the homemade fork with RC mounts so you can RC brakes on both sides?

Best regards

Moritz

Why ?
Because I do not have RC in stock and I really do not like these brakes.
This is not practical, it holds the mud and braking is not terrible.
These brakes are like many mythical things (Ringlé, ...) ;)
 

Latest posts

Back
Top