Sannino Decor

Sannino Decor: 50 seat 52 top ct

NOS quality, unmarked rare campag record triple and superb throughout
£495 for full build, split for FF possible. NOW £450
See pics below and more in thread
Full spec is:
Sannino frameset ( Sannino used high end frame tubing, Columbus SL or equivalent )
This is NOS quality with perfect chrome and not a mark on the paintwork.
Crankset, Campagnolo Super Record triple, very rare
Campag Nuovo record shifters
Campag 980 Rear Derailleur
The Front Mech is in the pics a Shimano triple, but I have sourced a campag triple front mech , not fitted yet.
The Calipers are NOS Gipiemme Azzuro ( http://velobase.com/ViewComponent.aspx? ... 7&AbsPos=0 )
The seat post is Campag Record 2 bolt, 1044 MOD.
Headset is Super Record
The Hubs are Campagnolo ( Chorus I believe http://velobase.com/ViewComponent.aspx? ... &AbsPos=12 ) built onto NISI clincher rims.
Bars and stem are 3TTT, I haven't identified the brake levers but am happy to do so for any serious enquiry, as will I build this to include Super record derailleur and Pedals etc. at an agreed price.

That's a funky looking machine , where do you find a bike like that in that condition? Glws

^ trouble is I found 2! ( a 56 cm a few months later ) I have a real love of mad Italian paint work...couldn't resist

Re:

still here! offers?

I'll have to part this out if no-one wants the full bike, please check the pics...Anyone??

Re:

A few questions,
Seat tube 50cm centre-centre or centre-top?
Standover height?
I assume its 126mm rear spacing?
Measurement from fork crown race to headset lock nut? (Wondering if the head tube might be a bit too short for me).

Thanks.

Hi

From memory the seat tube is 50cm ct-ct ( The bike is kept at my girlfriend's house )
Yes 126 cm rear spacing, I'll get the other measurements later.
Where do you want the head tube measured from? bottom of headset lower cup ( you can't see the crown race? ) to top of locknut?
Thanks for enquiring.

Chris

Re:

Where do you want the head tube measured from?

Click to expand...

.
Head tube measurement plus the stack height of the headset, so yes, from the bottom of the lower cup to the top of the locknut.

Standover 76cm top to bottom of headset 13cm

any offers? I can split if needed