Retrobike
http://www.retrobike.co.uk/forum/

Kona Project 2 Forks 1 1/8th 230mm Steerer
http://www.retrobike.co.uk/forum/viewtopic.php?f=39&t=404534
Page 1 of 1

Author:  Paul R [ Tue Nov 05, 2019 8:52 pm ]
Post subject:  Kona Project 2 Forks 1 1/8th 230mm Steerer

For sale Kona Project 2 Forks 1 1/8th with 230mm steerer tube very nice and shiny a few chips/dings but these have been touched up and blended in with polish very hard to see them now. Then they were paint sealed for protection with finishkare 1000p sealent.

disc and v brake mounts.
I bought these for my Kona Lava Dome build but fork plans changed.

£75 posted? or if anyone has a nice Raceface LP turbine chainset with square taper id be interested in a swap

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Author:  Woz [ Fri Nov 08, 2019 7:55 pm ]
Post subject:  Re: Kona Project 2 Forks 1 1/8th 230mm Steerer

Could be interested in these. What is the axle to crown measurement please?

Author:  Paul R [ Sat Nov 09, 2019 5:11 pm ]
Post subject:  Re: Kona Project 2 Forks 1 1/8th 230mm Steerer

Hi they're 440mm from centre of where qr would go through on axle to top of crown where race for headset would go on

Hope this helps

Author:  Woz [ Tue Nov 12, 2019 10:56 am ]
Post subject:  Re: Kona Project 2 Forks 1 1/8th 230mm Steerer

OK thanks. I'll pass since they are not quite right for my build. GLWS.

Author:  Paul R [ Tue Nov 12, 2019 11:38 am ]
Post subject:  Re: Kona Project 2 Forks 1 1/8th 230mm Steerer

No worrys

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/