Raceface evolve xc crank arms/Hope m4. SOLD

cyfa2809 · Jul 4, 2012

Need bolt (£7 on crc i believe).
Otherwise not too bad. Unused by me but previous owner said all fine. No rings etc.

After £19 posted. SOLD

Hope m4 front brake. All seems ok (again unused by me) but has 5mm hose on 6mm fittings but doesnt seem to leak. (Some minor play in lever). I have some 6mm hose coming which will be included if it ever turns up! Caliper number 5.
No pads. Pictures if wanted (but similar to below).

£30

Feel free to offer - needs to go.
Happy to offer discount for multiple buys (check my other thread for a couple of bits).
http://www.retrobike.co.uk/forum/viewtopic.php?t=208542

drystonepaul · Jul 5, 2012

Are those Race Face cranks compatible with Shimano HT2 BBs Josh?

cyfa2809 · Jul 5, 2012

Yes sir they certainly are. So that includes shimano ones, hope, gusset and probably others.
24mm axle.

drystonepaul · Jul 5, 2012

Can you clarify which bolt they would need.
Looking at the description on CRC for this one: --> http://www.chainreactioncycles.com/Mode ... elID=40756
It appears that it doesn't actually fit the Evolve cranks.

cyfa2809 · Jul 5, 2012

Thats the one i thought it needed!
I didnt read that bit.
Just measured and the puller cap thread is approx 26mm and the botl thread approx. 17mm.
But it doesnt have the mesurements on the website!

Edit: some help but not much:
http://www.silverfish-uk.com/produc...nts_evolve_xc_chainset_-_triple.php?tab=kb#tc

drystonepaul · Jul 5, 2012

Hmmm? A bit vague isn't it?

Can you check whether a standard crank extractor fits the threads on the drive side arm please.
If it does then I reckon this bolt would probably work: --> http://www.chainreactioncycles.com/Mode ... elID=28893

Can you also measure the internal size of the threaded hole at the NDS end of the BB spindle. If it's give or take 18mm then I reckon that's the bolt to go for.

If it's closer to 15mm then one of these would probably be more suitable: --> http://www.chainreactioncycles.com/Mode ... delID=4010

Apologies for asking all these questions...

EDIT: just read the above post properly. I think you've answered my second question with the ~17mm measurement.
I haven't got a crank extractor to hand to measure though.

cyfa2809 · Jul 5, 2012

Crank extractor is approx. 22mm.

ba57ards · Jul 5, 2012

Ill have the cranks @15 quid

EarlofBarnet · Jul 5, 2012

Lovely cranks these, I've just put a set on my Genesis. The bolt appears to be a normal ISIS chainset to B/B for those interested in a set.

cyfa2809 · Jul 5, 2012

Thanks for the info Earl.

Will PM you ba57ards.

Raceface evolve xc crank arms/Hope m4. SOLD

cyfa2809

drystonepaul

cyfa2809

drystonepaul

cyfa2809

drystonepaul

cyfa2809

ba57ards

Senior Retro Guru

EarlofBarnet

cyfa2809

Similar threads

Latest posts