I'm after a few bits to get my commuter going. Not bothered about vintage - newer the better actually, but must be good condition. Based in Sheffield.
Bars - 25.4mm clamp, flat. Easton EA70 or similar. Hoping for a bargain here, budget £10 as there's plenty of cheap ones on eBay. Width not important as they're getting cut down.
V-brakes - XT preferred, front and rear. Levers also required.
Mavic XC717 26" rim, obviously needs to be straight and with not too much wear on the braking surface. 32h preferred, 36h would also be ok. It's for a dynohub, if anyone happens to have one of those knocking about too!
Dynohub - Shimano, 3W, disc mount not necessary but would be a bonus. DH-3N70 or similar.
Cheers,
Bars - 25.4mm clamp, flat. Easton EA70 or similar. Hoping for a bargain here, budget £10 as there's plenty of cheap ones on eBay. Width not important as they're getting cut down.
V-brakes - XT preferred, front and rear. Levers also required.
Mavic XC717 26" rim, obviously needs to be straight and with not too much wear on the braking surface. 32h preferred, 36h would also be ok. It's for a dynohub, if anyone happens to have one of those knocking about too!
Dynohub - Shimano, 3W, disc mount not necessary but would be a bonus. DH-3N70 or similar.
Cheers,
