Wanted - marzocchi bomber Z2 cable hanger

Re: Re:

jimo746":33r0lv5t said:
Is this the kind of thing that could be 3D printed?

May be, depends on the type of 3D printing. 3D printing as a service is not so cheap as you might think. I personaly don't like this plastic things as replacements, especialy on a security part like brakes.

I did some tests, SLS is absolutly perfect, but too expensive. But I'm already in, I think it will be March to start with production - not with SLS, but milling or somehow casting :-)
 

Attachments

  • IMG_20210116_121514.webp
    IMG_20210116_121514.webp
    116.9 KB · Views: 101
Not yet, sorry. I'd like to stay under 40€. It's difficult because this is not a part that is sold on a regular basis and I did not get that much feedback ;-)
 
Project finished! Have a look at this excellent results. 🎈

In the 1st picture the one on the right side is an Marzocchi original Canti Hanger.
 

Attachments

  • Canti Hanger multiple with original (1) 1080.webp
    Canti Hanger multiple with original (1) 1080.webp
    131.3 KB · Views: 2
  • Canti Hanger single (3) 1080.webp
    Canti Hanger single (3) 1080.webp
    134 KB · Views: 2
  • Marzocchi Bomber Canti Hanger 1080px.webp
    Marzocchi Bomber Canti Hanger 1080px.webp
    25 KB · Views: 2
Back
Top