- Feedback
- View
Frame only, 17.25" to top of seat tube, effective standover is 15", 27.2mm seat post needed and 68mm BB shell. Bought off Ajantom on here for £50, so that's what I need back, plus post at cost if needed (can now do next day through work for £
Lovely condition and all bearings etc are tight, threads are fine. Some chain off-age damage to stays, bit of gouging, can get better pics of that area if needed. Was advised 27.2 post is a bit tight, and it is - my way round it was a 27mm post, otherwise shim a smaller one....
Possible swaps/part exchanges - decent 8 speed rear wheel, poss. a pair?? Need a 73 x 113 (or 110?) sq. taper BB, higher quality the better, set of brakes with levers if not Avids (have nice Avid levers!), decent 8 speed chain, maybe two chains. Oh, and possibly another rear mech, maybe! :facepalm: Nice yellow or red grips, light pedals in same colours, and a 27.2 post as light as poss!
SOLD ON THE BAY FOR £65
Lovely condition and all bearings etc are tight, threads are fine. Some chain off-age damage to stays, bit of gouging, can get better pics of that area if needed. Was advised 27.2 post is a bit tight, and it is - my way round it was a 27mm post, otherwise shim a smaller one.... Possible swaps/part exchanges - decent 8 speed rear wheel, poss. a pair?? Need a 73 x 113 (or 110?) sq. taper BB, higher quality the better, set of brakes with levers if not Avids (have nice Avid levers!), decent 8 speed chain, maybe two chains. Oh, and possibly another rear mech, maybe! :facepalm: Nice yellow or red grips, light pedals in same colours, and a 27.2 post as light as poss!
SOLD ON THE BAY FOR £65
